Bedienungsanleitung Ferm VCM1008 (Seite 16 von 44) (Deutsch, Englisch, Holländisch, Französisch)

818305

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

3. Mount the applicable brush or nozzle

(10/11) on the machine (refer to the previous

paragraph “Nozzle/brush”).

4. Set the on/off switch (1) to the “I” position.

Airflow adjustment (Fig. G)

Use the slider (26) on the handle (13) to adjust the

suction.

Blower function (Fig. A, H)

Empty the container (3) and make sure it

is clear of debris before using the blower

function. The performance of the blower

function may be improved by removing

the filters (4/5/6).

Always wear safety goggles before using

the blower function.

Risk of flying objects. Keep bystanders

away while using the blower function.

1. Disconnect the flexible hose (14) from the

container (3).

2. Insert the end of the flexible hose (14) in

the blower port (27) on the other side of the

machine and turn clockwise to lock it in place.

3. Set the on/off switch (1) to the “I” position. Air

will blow out of the flexible hose.

Shut-off float

When the machine is used to clean up liquids

the container may become full at a certain point.

The shut-off float (24) in the air inlet will activate

once the container is at full capacity. Activation of

the float will cut off the suction power to prevent

water from entering into the air inlet. When this

happens, turn off the machine immediately and

empty the container before continuing to use the

machine.

The shut-off float (24) may also be activated when

the machine is tilted or turned over. Turn off the

machine immediately and ensure it is in a fully

upright position before continuing to use it.

5. MAINTENANCE

Before cleaning and maintenance,

always switch off the machine and

remove the mains plug from the mains.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and

dirt. Remove very persistent dirt using a soft

cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia,

etc. Chemicals such as these will damage the

synthetic components.

Container

Always empty and dry the container (3) after using

to the machine to vacuum liquids. The container

is not designed to store liquids for a prolonged

period and may corrode if it is not dried out after

each use.

Built-in filter cleaning function (Fig. I)

When you notice a decrease in suction power, the

filters may be clogged. The machine is equipped

with a cleaning function to help unclog the filters.

1. Set the on/off switch (1) to the “I” position.

2. Push down on the filter cleaning button (28) a

few times to unclog the filter.

Temporarily blocking the vacuum cleaner suction

will make this cleaning function more effective

at unclogging the filter. The vacuum handle (13)

may be blocked by hand, while pressing the

button (28) with the other hand. For one-handed

operation, use the tip of the handle (13) to press

down on the button (28) – this will simultaneously

enable the cleaning function and block the airflow

in the handle.

Manually cleaning the filters

For optimal performance it is

recommended to regularly change or

clean the filters (4/5/6) depending on

level of use.

1. Release the clamps (17) and remove the top

section (2) from the container (3).

2. Carefully remove the filters (4/5/6) from the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm VCM1008 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info