779769
18
Zoom out
Zoom in
Vorherige Seite
1/27
Nächste Seite
1. Place the turbo nozzle on the quick lock 15 of the spray lance in such a way that
the small rectangular elevation fits exactly into the rectangular recess in the
spray lance 16 .
2. Press the turbo nozzle down firmly on the spray lance. The yellow button of the
quick lock clicks once the nozzle is positioned correctly.
Removing the turbo nozzle
1. Stop the washer and move the ON/OFF switch 5 to OFF.
2. Push the trigger 13 until the pressure in the washer has been released.
3. Press the yellow button of the quick lock 15 on the spray lance 16 and pull off
the turbo nozzle 19 .
Fitting the Vario pressure nozzle
The Vario pressure nozzle 20 produces a fan beam at a 30° angle.
1. Place the Vario pressure nozzle on the quick lock 15 of the spray lance in such a
way that the small rectangular elevation fits exactly into the rectangular recess
in the spray lance 16 .
2. Press the Vario pressure nozzle down firmly on the spray lance. The yellow
button of the quick lock clicks if the Vario pressure nozzle is positioned correctly.
3. Turn the Vario pressure nozzle to set the desired water pressure.
Removing the Vario pressure nozzle
1. Stop the washer and move the ON/OFF switch 5 to OFF.
2. Push the trigger 13 until the pressure in the washer has been released.
3. Press the yellow button of the quick lock 15 on the spray lance 16 and pull off
the Vario pressure nozzle 20 .
Fitting the wash brush
The wash brush 17 is suitable for cleaning surfaces delicately.
In the process, the high-pressure jet is used to operate the wash brush; the water
strikes the surface to be cleaned only at lower pressure.
The rotating wash brush head achieves the cleaning effect and the removed dirt is
washed away with the water.
1. Remove the spray lance 16 ,see chapter “Removing the spray lance”.
2. Put the wash brush onto the spray gun 11 .
3. To fix the wash brush, push it slightly downwards and turn it clockwise at the
same time.
Removing the wash brush
1. Stop the washer and move the ON/OFF switch 5 to OFF.
Using the cleaning attachments
18
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferrex Q1W-SP07-2200A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info