Bedienungsanleitung Festool ATF 65 E (Seite 8 von 24) (Englisch)

458693

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Technical data AT 65 E

Power input 1 500 W

No load speed 1 800 - 3 800 rpm

Angele of cut 0° - 45°

Depth of cut at 90° / 45°) 66 mm (2.6) / 48 mm (1.9)

Saw blade diameter 190 mm (7.5)

Saw blade hole diameter 30 mm (1.18)

Weight 6.7 kg (14.8 lbs)

Safety acc. to IEC 745, UL 745, CSA C22.2 No. 745

1 Symbols

V volts

A amperes

Hz hertz

W watt

~ alternating current

no load speed

Class II Construction

rpm revolutions per minute

1.1 Spindle stop / Dispositif darrêt de laxe / Dispositivo de

bloqueo del husillo

1.2 Protective cover / Capot de protection / Caperuza

protectora

1.3 Cutting depth scale / Vernier de profondeur de coupe /

Escala de profundidades de corte

1.4 Cutting depth end stop / Butée de profondeur de coupe

/ Tope de profundidad de corte

1.5 Setscrew for angle adjustment / Vis de blocage pour le

réglage en biais / Tornillo de sujeción para regulación

del ángulo de inclinación

1.6 Saw table / Table de scie / Mesa de aserrado

1.7 Switching on and unlocking block / Bouton de mise en

marche et de déverrouillage / Bloqueo de conexión y de

desenclavamiento

1.8 On/Off switch / Interrupteur marche/arrêt / Interruptor

de conexión/desconexión

1.9 Speed controller / Régulateur de vitesse de rotation /

Regulador del número de revoluciones

1.10 Handle / Poignée / Empuñadura

1.11 Additional handle / Poignée supplémentaire /

Empuñadura adicional

1.12 Hexagon socket wrench / Clé mâle hexagonale / Llave

macho hexagonal

1.13 Guide jaws / Joues de guidage / Mordazas de guía

1.14 Screw for adjusting the centre of gravity / Vis de réglage

du point de pivotement / Tornillo para el ajuste del punto

de giro

2.3 Extension cable

If an extension cable is required, it must have a sufficient

cross-section so as to prevent an excessive drop in voltage

or overheating. An excessive drop in voltage reduces the

output and can lead to failure of the motor. The following

table shows you the correct cable diameter as a function of

the cable length for the AT65E. Use only U.L. and CSA listed

extension cables. Never use two extension cables together.

Instead, use one long one.

2.2 Electrical connection

The network voltage must conform to the voltage indicated

on the rating plate. A 16 A safety fuse (for 120 V) or a

corresponding protective circuit-breaker is required.

Under no circumstances should the electrical tool be used

when the power cable is damaged. A damaged cable must be

replaced immediately by an authorised Customer Service

Centre. Do not try to repair the damaged cable yourself. The

use of damaged power cables can lead to an electric shock.

Various dust created by power sanding, sawing,

grinding, drilling and other construction activities contains

chemicals known (to the State of California) to cause cancer,

birth defects or other reproductive harm. Some examples

of these chemicals are:

 lead from lead-based paints,

 crystalline silica from bricks and cement and other masonry

products, and

 arsenic and chromium from chemically-treated lumber.

The risk from these exposures varies, depending on how

often you do this type of work.

To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment,

such as dust masks that are specially designed to filter out

microscopic particles.

2 Functional description

2.1 Intended use

The AT 65 E is designed exclusively for the sawing of wood,

wood-like materials and plastics. When the AT 65 E is fitted

with the aluminium saw blade (Order no. 486 299), it can also

be used for sawing aluminium. This machine should not be

used for processing other materials.

The machine should not be converted or modified, e.g. for

any other form of use, other than as specified in these

operating instructions.

The user shall be liable for damages and accidents due to

incorrect use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ATF 65 E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info