Bedienungsanleitung Festool CS70EB-S PR (Seite 20 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573129

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

EKAT

Use only original Festool spare parts!

Order No. at: www.festool.com/Service

The machine is equipped with special self-dis-

connecting carbon brushes. If they are worn, the

power is interrupted automatically and the ma-

chine comes to a standstill.

Maintain your machine regularly to make sure it

functions reliably:

- Use an extractor to remove the dust deposits.

- Keep the guide rods clean and grease regu-

larly.

- Keep the toothed gears behind the rotary han-

dle [2-3] clean.

- Replace worn or damaged table inserts [1-4].

- If wood chips block up the extraction channel

on the lower protective cover, unscrew the ro-

tary knob [5-8] and move the ﬂ ap [5-6] approx.

8 mm to open up a gap so that the blockage is

removed.

- If the blockage is serious or the saw seizes

when the initial cut is made, unscrew the fas-

teners [5-7] using the hexagon wrench so that

the ﬂ ap [5-6] can be opened completely. Close

the ﬂ ap again prior to use.

- After completing work, wind up the power ca-

ble onto the holder [1-3].

- A damper allows the saw unit to retract evenly

along the entire cutting length. If this is not the

case, the damper can be adjusted through the

hole [3-5].

Filter cleaning (CS 70 EB only)

You should clean the air intake ﬁ lter [3-2] if the

temperature monitor (see 7.1) triggers shutdown

cycles more frequently without the machine be-

ing overloaded excessively.

Unscrew the rotary knob [3-1].

Remove the ﬁ lter insert.

Knock off the dust or use an extractor on the

surface of the ﬁ lter.

Insert the ﬁ lter again.

 If damaged, replace the ﬁ lter with a new ﬁ l-

ter cartridge.

10 Disposal

Do not throw the power tool in your household

waste! Dispose of machines, accessories and

packaging at an environmentally-responsible

recycling centre. Observe the valid national reg-

ulations.

EU only: In accordance with European Directive

on waste electrical and electronic equipment

and implementation in national law, used elec-

tric power tools must be collected separately

and handed in for environmentally friendly recy-

cling.

Information on REACh: www.festool.com/reach.

11 EU Declaration of Conformity

Bench-mounted circular saw

and circular trimming saw

Serial no.

CS 70 E 491304, 491305, 493474

CS 70 EB 491302, 491303, 493559

Year of CE mark 1995

We declare under sole responsibility that this

product complies with all the relevant require-

ments in the following Directives, standards and

normative documents:

2006/42/EC, 2004/108/EC, 2011/65/EU, EN

61029-1, EN 61029-2-1, EN 55014-1, EN 55014-

2, EN 61000-3-2, EN 61000-3-3

Festool Group GmbH & Co. KG

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Martin Zimmer

Head of Research, Development and Technical

Documentation

2012-12-19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CS70EB-S PR Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info