Bedienungsanleitung Festool CTL 48 E LE EC (Seite 17 von 101) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499174

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

CTM 48 E LE EC, CTL 48 E LE EC

Observe the following

when extracting

dust generated by operating electric power

tools:

If the exhaust air is discharged back into the

room, the

air renewal rate L

within the

room must be sufficient. The volume of air

discharged back into the room must not ex-

ceed 50% of the fresh air volume flow (room

volume V

x air renewal rate L

). Observe all

the relevant regional regulations.

Remember:

A moist main filter clogs more

quickly when extracting dry materials.

Therefore, dry the main filter before extract-

ing dust or replace the damp filter with a dry

one.

8.3 Extracting fluids

Before extracting fluids, remove the filter

bag (see Chapter 7.8). We recommend using

a special wet filter.

The dust extractor stops automatically when

the maximum level is reached.

8.4 After finishing work

Switch off the mobile dust extractor and

disconnect the plug.

Wind up the mains power cable.

Empty the dust container.

Only CTM 48 E LE EC:

Close off the ex-

tractor opening [1-2] using the sealing

plug [1-1].

The machine shall be stored indoors

only.

Place the mobile dust extractor in a dry

room inaccessible to unauthorised users.

9 Service and maintenance

Damaged safety devices and components

must be repaired or replaced in a recognised

specialist workshop, unless otherwise indi-

cated in the operating manual.

Observe the following instructions:

– A dust test must be performed at least

once a year by the manufacturer or an in-

structed person. This test may include

checks to determine whether the filter is

damaged, the machine is sealed properly

and the monitoring features are function-

ing correctly.

– During maintenance and repair work, all

components that cannot be cleaned satis-

factorily must be replaced. The old compo-

nents must be sealed in impermeable

plastic bags prior to disposal in compliance

with applicable regulations for this type of

waste.

– Provided maintenance personnel or other

persons in the vicinity are not endangered,

the user must dismantle and clean the ma-

chine prior to performing maintenance

work. Appropriate precautionary measures

include decontaminating the machine prior

to disassembly, making provisions for lo-

cally filtered forced ventilation at the loca-

tion of machine disassembly, cleaning the

maintenance area and appropriate person-

al protective equipment.

CAUTION

Escaping foam and fluids

Switch off the machine immediately and

empty the dirt trap.

WARNING

Hazardous dust

Damage to the respiratory passage

Wipe down the mobile dust extractor and

clean all accessories thoroughly using the

extractor (inside and out) before removing

from the working area.

Parts that you were not able to clean thor-

oughly must be sealed in an airtight plastic

bag prior to transportation.

Wear a dust mask!

WARNING

Risk of injury, electric shock

Always disconnect the mains plug from the

socket before performing maintenance

work on the machine!

All maintenance and repair work which re-

quires the motor housing to be opened

must only be carried out by an authorised

service workshop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool CTL 48 E LE EC Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info