796189
23
Zoom out
Zoom in
Vorherige Seite
1/152
Nächste Seite
Connecting a new power tool overwrites
the previous connection.
This function is only possible on Festool
power tools with a Bluetooth® battery
pack.
9.2 Connecting the CT-F I remote control
To be able to connect a remote control to a
cordless mobile dust extractor, the remote con
trol must be reset (see "Reset on the remote
control").
Remote controls that have not been connected
previously can be connected directly.
A connection that has been created be
tween remote controls and the cordless
mobile dust extractor will persist even af
ter pressing the on/off button or removing
a battery pack (from the cordless mobile
dust extractor).
The cordless mobile dust extractor can be
connected to as many as five remote con
trols at the same time. The cordless mo
bile dust extractor can only be connected
to one battery-powered power tool at a
time.
If a cordless mobile dust extractor which
was initially switched on using the battery
pack is switched off using the remote con
trol, the temporary connection between
the connected battery pack and the cord
less mobile dust extractor will be lost. The
battery pack can then be connected again.
Hold down the connection button [1-16] on
the cordless mobile dust extractor for three
seconds in standby mode.
The connection display [1-17] rapidly flashes
blue. For a period of 60 seconds, the cordless
mobile dust extractor is ready for connection.
Press the MAN button [1-21] on the remote
control.
The remote control is permanently stored in the
cordless mobile dust extractor.
Resetting on the remote control
Resetting deletes the connection between a re
mote control and the cordless mobile dust ex
tractor.
Press and hold the connection button [1-19]
and the MAN button [1-21] for 10 seconds.
The LED indicator [1-20] lights up purple, if the
reset has taken place.
9.3 Connecting a mobile device
The cordless mobile dust extractor can be con
nected to a mobile device (e.g. for a software
update) using the Festool Work app.
Hold down the connection button [1-16] on
the cordless mobile dust extractor for three
seconds in standby mode.
The connection display [1-17] rapidly flashes
blue. For a period of 60 seconds, the cordless
mobile dust extractor is ready for connection.
Follow the instructions provided in the
Festool Work app to authorise the secure
connection.
10 Settings
10.1 Adjusting the suction power
Press the plus or minus button for the suc
tion power adjustment [1-14] while extract
ing.
The green LEDs on the status display [1-15] in
dicate the current performance level.
10.2 Connecting sleeve
The bypass function of the connecting
sleeve [3-1] prevents strong suction from
sanding machines and floor nozzles on smooth
surfaces.
Open
Turn the adjusting ring to the "OPEN" posi
tion.
Close
Turn the adjusting ring to the "CLOSE" posi
tion.
10.3 Volumetric flow monitoring (only for
dust class M)
CAUTION
Hazardous dust
Damage to the respiratory passage
Correct functioning of volumetric flow
monitoring is only ensured with the suction
hose D 27/32x3.5m-AS/CTR.
For safety reasons, an acoustic warning signal
sounds if the air speed in the suction hose falls
below 20 m/s.
English
23
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Festool CTLC MINI I wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info