Bedienungsanleitung Festool DTSC 400 Li (Seite 14 von 88) (Alle Sprachen)

778634

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

DTSC 400 Li, RTSC 400 Li

– Do not open the battery pack or the charger!

–Prevent metal parts (e.g. metal chips) or fluids

from entering the charger!

–

Do not use power adapters or battery packs

form other manufacturers to operate the cord-

less power tool. Do not use any charger from

other manufacturers for charging the battery

pack.

The use of impermissible accessories may

result in electric shock and / or serious acci-

dents!

– Protect the battery pack from excessive heat > 50

°C or constant heat sources such as sunlight or

naked flames!

– Never use water to extinguish burning li-ion bat-

tery packs! Use sand or a fire blanket.

– Check the plug and the cable regularly and

should either become damaged, in order to avoid

a hazard, have them replaced by an authorised

after-sales service workshop.

– Always pull the mains plug out of the socket

when the charger is not in use.

2.4 Emission levels

Typically, the noise levels that are determined in ac-

cordance with EN 62841 (see EC declaration of con-

formity) are as follows:

Vibration emission value a

(vector sum for three

directions) and uncertainty K measured in accor-

dance with EN 62841 (see EU Declaration of Con-

formity):

The specified emission values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary esti-

mates regarding vibration and noise loads during

operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with other

insertion tools or if not maintained adequately. Take

note of idling and downtimes of machine!

3 Intended use

The sanders are designed for sanding wood, plas-

tic, composites, paint/varnish, filler and similar

materials as directed. Metals and materials that

contain asbestos must not be processed.

To guarantee electrical safety, the machine must

not be damp or operated in a damp environment.

The machine must only be used for dry sanding.

The user is liable for improper or non-in-

tended use.

4Technical data

5 Machine features

DTSC 400Li RTSC 400Li

Sound pressure level

68 dB(A) 68 dB(A)

Noise level L

79 dB(A) 79 dB(A)

Uncertainty K 3 dB 3 dB

CAUTION

When working with noise

Damage to hearing



Always use ear protection.

DTSC 400Li RTSC 400Li

Vibration emissions

value (triaxial) a

< 2.5 m/s

3 m/s

Uncertainty K 2 m/s

2 m/s

Cordless orbital sander DTSC 400Li RTSC 400Li

Voltage 18 - 20 V 18 - 20 V

No-load speed 6000 - 10000 rpm 6000 - 10000 rpm

Sanding stroke 2,0 mm 2,0 mm

Sanding pad 100 x 150 mm 80 x 130 mm

Weight (excl. battery pack, incl. sanding pad) 0,9 kg 0,9 kg

[1-1]

On/Off switch

[1-2]

Battery pack

[1-3]

Capacity display

[1-4]

Extractor connector

[1-5]

Speed control

[1-6]

Sanding pad

[1-7]

Edge protector

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool DTSC 400 Li Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info