Bedienungsanleitung Festool DTSC 400 Li (Seite 16 von 88) (Alle Sprachen)

778634

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

DTSC 400 Li, RTSC 400 Li

7.2 Changing sanding pad [4a]

An optimal work result can only be achieved

using original accessories and consumables.

The use of non-original accessories or con-

sumables invalidates the right to claim under war-

ranty.

If the StickFix coating on the sanding pad has worn

out, the entire sanding pad can be replaced:

Undo the four screws.

Remove the sanding pad by pulling it down-

wards.

Attach the new sanding pad.

Use four screws to tighten it by hand (2.5 Nm).

7.3 Attaching sanding accessories using

StickFix [4b]

The suitable StickFix sandpaper and StickFix sand-

ing cloth can be attached quickly and simply to the

StickFix sanding pad.



Affix the self-adhesive sanding accessory to the

sanding pad.

7.4 Dust extraction

Integral dust extractor with long-life dust bag

As standard, the sanders are equipped with an inte-

gral dust extractor. The sanding dust is extracted

through extraction openings in the sanding pad and

is collected in the dust bag.

Installing the dust bag [5]

Slide the dust bag onto the machine until it

clicks into place.

If the suction power is decreasing, empty the

dust bag.

Press the dust bag onto the actuating elements.

Remove the dust bag by moving it towards the

rear.

Open the flap on the dust bag.

Empty the dust bag and dispose of the waste.

Dust extraction with Festool's mobile dust ex-

tractor

To prevent having to frequently empty the dust bag

when carrying out sanding work for a long period of

time, you can connect Festool's mobile dust ex-

tractor (with an extraction hose diameter of 27 mm)

to the extractor connection piece

[1-4]



The start-up mode switches the mobile dust ex-

tractor on as soon as you switch the orbital

sander on. The start-up mode only works in

conjunction with the mains adapter.

Recommendation:

Use an antistatic suction hose.

This helps reduce the electric charge.

7.5 Edge protector [6]

The edge protector

[1-7]

prevents the sanding pad

circumference from coming into contact with a sur-

face (e.g. when sanding along a wall or a window),

thus preventing back-kick of the machine, or ma-

chine damage.

Push the edge protector into the groove on the

machine.

Slot the two ends of the edge protector into

place until they click.

Sanding work Adjusting

wheel set-

ting

– Sanding with max. abrasion

– Sanding off old paint

– Sanding of wood and veneered surface

prior to paintwork

– Intermediate sanding of paintwork on sur-

faces

5 - 6

– Sanding thinly applied undercoat

– Sanding wood with sanding cloth

– Edge breaking on wooden parts

– Smoothing primed wooden surfaces

4 - 5

– Sanding solid wood and veneered edges

– Sanding rebate of windows and doors

– Intermediate sanding of paintwork at edg-

– Light sanding of natural wood windows

using sanding cloth

– Smoothing wooden surfaces using sand-

ing cloth before staining

– Rubbing or removing excess limestone

residue using sanding cloth

3 - 4

– Intermediate sanding of paintwork on

stained surfaces

– Cleaning natural wood window rebate us-

ing sanding cloth

2 - 3

– Sanding stained edges

– Sanding of thermoplastics

1 - 2

WARNING

Dust hazard



Dust can be hazardous to health. Always work

with a dust extractor.



Always read applicable national regulations be-

fore extracting hazardous dust.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool DTSC 400 Li Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info