Bedienungsanleitung Festool LEX 3 2 5 (Seite 15 von 101) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

499936

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

LEX 3

ings that may contain electrical or other sup-

ply cables that harbour hidden dangers.

Ensure that there are no electrical cables, gas

pipelines or similar that, if damaged, could

pose a hazard when the machine is used.

Hazard as a result of dust and vapours

– If hazardous dust is produced during sand-

ing, the machine should be connected to an

appropriate extractor and the safety regula-

tions that apply to the working material

should be observed.

– A risk assessment in relation to this hazard

must be carried out and corresponding con-

trol mechanisms implemented. Arising dust

must be factored in.

– Connect the dust extractor. Make sure that

available dust extraction equipment is con-

nected and used correctly. Observe the re-

gional safety regulations for hazardous dusts

and vapours. Operate and service the com-

pressed air tool as described in the recom-

mendations included in these instructions

and use accessories and attachments from

Festool to minimise the release of dust and

vapours into the atmosphere. In dusty envi-

ronments, make sure that the dissipation of

exhaust air does not disturb the dust.

– If necessary arising dust or vapours must be

controlled at the place of their release.

– All components must be fitted correctly and

meet all requirements to ensure that the

compressed air tool operates correctly.

– Select, maintain and replace accessories and

consumables according to these operating in-

structions.

– Wear a dust mask. Observe instructions from

the employer or occupational and health reg-

ulations.

Noise hazard

– Higher noise level can lead to permanent

hearing damage, loss of hearing or other

problems if inadequate hearing protection is

not worn or available.

– A risk assessment in relation to this hazard

must be carried out and corresponding con-

trol mechanisms implemented, e.g. the use

of insulating materials.

– Wear ear protection. Observe instructions

from the employer or occupational and health

regulations.

– Operate and maintain compressed air tool

according to these operating instructions.

– Select, maintain and replace accessories and

consumables according to these operating in-

structions.

– Assure function of the silencer at the com-

pressed air tool.

Vibration hazard

– Vibrations can cause damage to nerves and

problems with blood circulation in hands and

arms.

– When working in cold environments wear

warm clothing and keep hands warm and dry.

– In the event of numbness, tingling or pains in

fingers or hands or white colouration of the

fingers or hands, cease work, inform employ-

er and consult a doctor.

– Operate and maintain compressed air tool

according to these operating instructions.

– Do not hold the compressed air tool too tight,

but with a secure grip while observing the

necessary hand reaction forces. The vibration

risk is greater with increasing gripping

strength.

Additional safety information for pneu-

matic machines

– Compressed air can cause serious injuries.

– Disconnect the compressed air hose from

the compressed air supply. In the event

of non-use of the compressed air tool,

before maintenance and when changing

insertion tools.

– Never direct the air flow towards yourself

or other persons.

– Hoses flapping around can cause serious in-

juries. Check whether hoses and their fixing

devices have not suffered damage or become

loose.

– The operating pressure should not exceed

6.2 bar.

– Never carry the compressed air tool by the

compressed air hose.

Further safety information

–

Keep your work area tidy.

Untidiness in

the work area can cause accidents.

–

Take into consideration environmental

influences.

Do not leave compressed air

tools out in the rain.

–

. Keep away from children!

Do not allow

others to touch the compressed air tool or the

compressed air hose. Keep others away from

your work area.

–

Store your compressed air tools safely.

Unused compressed air tools should be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool LEX 3 2 5 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info