Bedienungsanleitung Festool LHS-E 225 EQ Planex Easy (Seite 15 von 110) (Alle Sprachen)

778808

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

LHS-E 225

large accumulation of metal dust may create

electrical hazards.

Kickbacks and corresponding safety instructions:

A kickback occurs as a result of using the power

tool incorrectly or misguidedly. It can be prevented

by taking appropriate precautions, as described be-

low.

Hold the power tool firmly with both hands and

move your body and arms into a position that al-

lows you to intercept the kickback forces. Al-

ways use the additional handle, if there is one,

so that you have the best possible control over

the kickback forces or torque reactions during

start-up.

The operator can control the kickback

and reaction forces by taking suitable precau-

tionary measures.

Never place your hands near rotating tools.

The

power tool may move across your hand in the

event of a kickback.

Take particular care when working on corners

and sharp edges, for example. Prevent the in-

sertion tool from rebounding away from the

workpiece and jamming.

The rotating insertion

tool tends to get jammed when working on cor-

ners and sharp edges, or if it rebounds in the pro-

cess. This results in loss of control or kickbacks.

Special safety instructions for sanding

Do not use oversized sanding discs. Follow Fes-

tool's specifications when selecting sanding

discs.

A sanding disc that is too large and pro-

trudes over the sanding pad represents a cutting

injury hazard and can cause catching, disc break-

age or kickback.

Further safety instructions

–

Harmful/toxic dust can be produced during your

work (e.g. lead-containing paint, some types of

wood and metal).

Contact with this dust, espe-

cially inhaling it, can represent a hazard for oper-

ating personnel or persons in the vicinity. Comply

with the safety regulations that apply in your

country. Connect the electric power tool to a suit-

able extraction system.

To protect your health, wear a P2 protective

mask.

Always wear protective goggles to protect

against sanding hazards.

–If potentially explosive or self-igniting dust

is produced during sanding, the machining in-

structions issued by the material manufacturer

must always be followed.

–

Attention: Risk of fire! Avoid overheating the

grinding material and the sander. Always empty

the dust container before taking a break.

Swarf

in the filter bag or filter of the mobile dust ex-

tractor may self-ignite in unfavourable condi-

tions such as flying sparks when grinding metals.

Particular danger exists if the swarf is mixed with

paint, polyurethane residue or other chemical

materials and the grinding material is hot after

long periods of work.

–

Hold the power tool firmly with both hands and

assume a stable stance when performing work.

Using both hands ensures that the power tool is

guided safely.

–

Always use an antistatic suction hose with the

power tool.

A slight electric shock may cause you

to panic briefly and become distracted, which

may result in an accident.

–

Always use original Festool sanding pads.

For-

eign pads are not suitable for the speed of the

sander and may break.

–

Keep the carry bag out of reach of children.

Children may suffocate or be strangled when

playing with the carry bag.

–

Only for AS/NZS:

The tool shall always be sup-

plied via residual current device with a rated re-

sidual current of 30 mA or less.

2.3 Emission levels

Typically, the noise levels that are determined in ac-

cordance with EN 62841 (see EC declaration of con-

formity) are as follows:

Vibration emission value a

(vector sum for three

directions) and uncertainty K measured in accor-

dance with EN 62841 (see EU Declaration of Con-

formity):

The specified emission values (vibration, noise)

Sound pressure level L

= 69 dB(A)

Noise level L

= 80 dB(A)

Uncertainty K = 3 dB

CAUTION

Noise generated when working

Damage to hearing



Always use ear protection.

Vibration emission level

(3 directions)

< 2,5 m/s

K = 1,5 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool LHS-E 225 EQ Planex Easy Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info