Bedienungsanleitung Festool LHS-E 225 EQ Planex Easy (Seite 16 von 110) (Alle Sprachen)

778808

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

LHS-E 225

– are used to compare machines.

– They are also used for making preliminary esti-

mates regarding vibration and noise loads during

operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with other

insertion tools or if not maintained adequately. Take

note of idling and downtimes of machine!

3 Intended use

The long-reach sander is designed for sanding

primed drywall constructions, ceilings and walls

indoors and also for removing carpet residue, coats

of paint, coverings, adhesives and loose plaster.

When sanding outside or in damp rooms, an isolat-

ing transformer must be used.

Always use an appropriate mobile dust extractor.

The Festool CTL/M 36 E AC

PLANEX

mobile dust

extractor is optimally designed for large quantities

of dust.

The long-reach sander is

not

suitable for wet sand-

ing.

The user is liable for damage and accidents caused

by improper and non-intended use.

4Technical data

5 Machine features

The specified illustrations appear at the beginning

of the Operating Instructions.

6 Commissioning



Connecting and disconnecting the mains cable -

[2]

Before switching on the power tool, make

sure that the bayonet fitting at the mains ca-

ble is closed fully and locked.



To connect the suction hose

[3]

, see also Sec-

tion 7.5.

Using a special vacuum sleeve, the

PLANEX

suction hose guarantees a permanent fixing

and better protection against kinking.

ON/OFF button [4]

7 Settings

7.1 Electronics

The power tool is equipped with a brushless EC-

TEC motor for a long service life and power elec-

tronics with the following properties:

Long-reach sander LHS-E 225EQ

Power 400 W

No-load speed 400 - 920 rpm

Sanding pad diameter 215 mm

Abrasive diameter 225 mm

Tool holder D 13/10

Dust extractor connection 36 mm (27 mm)

Length 1,59 m

Weight (without mains cable,

with sanding pad)

4 kg

Safety class /II

[1-1]

Sanding head

[1-2]

plug it mains cable

[1-3]

On/Off switch

[1-4]

Extractor connector

[1-5]

Plug it-connection

[1-6]

Suction sleeve stop

[1-7]

Speed control

[1-8]

Detachable brush segment

[1-9]

Insertion tool/sanding pad

[1-10]

Gripping surfaces

WARNING

Unauthorised voltage or frequency!

Risk of accident



The mains voltage and the frequency of the pow-

er source must correspond with the specifica-

tions on the machine's name plate.



In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be

used.

ON (I)

Push the on/off switch

[1-3]

down and

forward.

On/off switch is locked.

OFF (0)

Push the on/off switch

[1-3]

down and

unlock it.

On/off switch moves back to the 0 posi-

tion.

WARNING

Risk of injury, electric shock



Always pull the mains plug out of the socket be-

fore performing any type of work on the ma-

chine!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool LHS-E 225 EQ Planex Easy Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info