Bedienungsanleitung Festool PF1200E1 (Seite 11 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

574103

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Attach the guide rail to the workpiece as fol-

lows

- The guide rail must extend at least 150 mm

beyond either end of the workpiece.

- Align the guide rail using the gauge mark (3.2).

The front edge (3.4) shows the centre of the

groove.

- Secure both sides of the guide rail to the work-

piece using two clamps (3.3).

Metalworking

The following precautions are to be taken

when processing metals for safety rea-

sons:

- Pre-connect a residual current circuit-breaker

(FI, PRCD).

- Connect the machine to a suitable dust extrac-

tor.

- Clean tool regularly of dust accumulations in

the motor housing.

Wear protective goggles.

Route the groove as follows

- Ensure that the sensor and depth stop are cor-

rectly set for the workpiece thickness.

- Place the machine on the guide rail in front of

the edge of the workpiece. The mark (4.7) shows

the centre axis of the router.

- Switch on the machine.

- Move the machine downwards slowly until the

stop plate (4.4) is resting on the depth stop

(4.5).

- Move the machine forward along the guide rail

in order to route the groove. The gauge mark

(4.6) shows the centre of the groove.

- When the groove is complete, switch the ma-

chine off and swivel it upwards.

Plunge-cut

In the case of plunge cuts, a guide limiter

(6.1) must be attached behind the ma-

chine because of the danger of kickbacks.

Position the machine on the guide limiter,

hold securely with both hands and move

it downwards very slowly.

7 Maintenance and care

Always remove the power supply plug

from the socket before carrying out any

work on the machine.

All maintenance and repair work which

requires the motor casing to be opened

may only be carried out by an authorised

service centre.

Always keep the machine and the ventilation slots

clean.

The tool is ﬁ tted with special motor brushes with

an automatic cut-out. When the brushes become

worn the power supply is shut off automatically

and the tool comes to a standstill.

A brake disc (1.3) decelerates the sensor to pre-

vent it from being accelerated by the rotating

tool and leaving marks behind on the workpiece.

Replace the brake disc if its power decreases.

8 Accessories, tools

For your own safety, use only original

Festool accessories and spare parts.

The accessory and tool order number can be found

in the Festool catalogue or on the Internet under

“www.festool.com”.

9 Disposal

Do not throw the power tool in your household

waste! Dispose of the machine, accessories and

packaging at an environmentally-responsible

recycling centre! Observe the valid national regu-

lations.

EU only: European Directive 2002/96/EC stipulate

that used electric power tools must be collected

separately and disposed of at an environmentally

responsible recycling centre.

10 Warranty

For our tools, we give warranty for material and

production defects in accordance with the locally

applicable legal provisions, but in any case for at

least 12 months. Within the EU member states,

the warranty period is 24 months (veriﬁ cation

through invoice or delivery note).

Damage caused by, in particular, natural wear,

overloading, incorrect handling, or damage caused

by the operator, or damage caused through use

of the equipment contrary that speciﬁ ed in the

Operating Instructions, or damage which was

known at the time of purchase, is not covered by

the warranty.

Furthermore, damage caused by the use of non-

original Festool accessories and consumable

material (e.g. sanding pads) is also excluded.

Complaints can only be recognised if the tool is re-

turned while still assembled to the supplier or an

authorised Festool Customer Service workshop.

Keep the Operating Instructions, Safety Instruc-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool PF1200E1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info