Bedienungsanleitung Festool ps 300 eq plus al (Seite 16 von 86) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch)

382959

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

TRION

Damaged safety devices and components

must be repaired or replaced in a recognised

specialist workshop, unless otherwise indi-

cated in the operating manual.

To ensure constant air circulation, always

keep the cooling air openings in the motor

housing clean and free of blockages.

10 Accessories

Use only original Festool accessories and

Festool consumable material intended for

this machine because these components are

designed specifically for the machine. Using

accessories and consumable material from

other suppliers will most likely affect the

quality of your working results and limit any

warranty claims. Machine wear or your own

personal workload may increase depending

on the application. Protect yourself and your

machine, and preserve your warranty claims

by always using original Festool accessories

and Festool consumable material!

The order numbers of the accessories and

tools can be found in the Festool catalogue or

on the Internet under "www.festool.com".

10.1 Festool guide system FS

The use of the Festool guide system FS (Fig-

ure [7])facilitates the production of straight

and precise cuts, particularly with material

thicknesses up to 20 mm. The jigsaw is here-

by placed in a guide stop [7-1] order no.

490031) and guided along the guide rail in

this. The guide stop has two adjustable limit

stops [7-2] for a setting free from play. Use

only crossed saw-blades when utilising the

guide stop. We recommend Festool saw

blade S 75/4 FSG.

10.2 Parallel guide

Use the parallel guide (order no. 490119) to

guide the jigsaw parallel to the workpiece

edge. The parallel guide can be fitted on both

sides of the base runner:

Slide clamping clip [8-1] onto the base

runner from the front,

insert parallel guide [8-2] through the

clamping clip from the side to the desired

position,

tighten rotary knob [8-3].

10.3 Circle cutter

The circle cutter (order no. 490118) can be

used to produce circular cuts with a diameter

between 120 and 720 mm. The circle cutter

can be fitted on both sides of the base run-

ner:

Slide clamping clip [8-1] onto the base

runner from the front,

insert circle cutter [8-4] through the

clamping clip from the side to the desired

position,

tighten rotary knob [8-3],

insert circle tip [8-5] in the rear bore hole

of the circle cutter.

10.4 Festool CMS

By fitting the jigsaws in the Festool Systems

CMS you end up with a semi-stationary

bench-mounted saw for profile cuts. Further

information can be fond in the CMS brochure.

10.5 Saw blades, other accessories

In order to saw different materials quickly

and cleanly, Festool offers saw blades for all

applications that are specially designed for

your Festool jigsaw.

11 Disposal

Do not throw the power tool in your house-

hold waste! Dispose of machines, accesso-

ries and packaging at an environmentally re-

sponsible recycling centre. Observe the valid

national regulations.

EU only:

European Directive 2002/96/EC

stipulates that used electric power tools must

be collected separately and disposed of at an

environmentally responsible recycling cen-

tre.

12 Warranty

We offer a warranty for material and produc-

tion defects for all our tools in accordance

with the locally applicable legal provisions,

but for a minimum of 12 months. Within the

EU member states, the warranty period is 24

months (verification through invoice or deliv-

ery note). Damage caused by the operator,

natural wear, overloading, incorrect handling

or through the use of the equipment not

specified in the operating manual, or damage

which was known at the time of purchase, is

not covered by the warranty. Furthermore,

damage caused by the use of non-original

accessories and consumable materials (e.g.

sanding pads) is also excluded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ps 300 eq plus al Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info