Bedienungsanleitung Festool PSBC400EB (Seite 17 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573110

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

CARVEX

work which generates dust, and protective

gloves when working with raw materials

and when changing tools.

– Always secure the workpiece in such a man-

ner that it cannot move while being sawed.

– Always connect the machine to a dust ex-

tractor when work involves dust generation.

–

Stroboscopic light can cause epileptic

seizures.

Do not use this machine if you are

susceptible to epileptic seizures.

– Do not look into the stroboscope light. Looking

into the light source can damage your vision.

5.3 Metal processing

When processing metal, the following

measures must be taken for safety rea-

sons:

– Connect the machine to a suitable dust ex-

tractor.

– Regularly remove dust deposits in the motor

housing.

– Use a metal saw blade.

– Close the chip guard.

5.4 Emission levels

Levels determined in accordance with EN

60745 are typically:

Vibration emission value a

(vector sum for

three directions) and uncertainty K mea-

sured in accordance with EN 60745:

The emission values specified (vibration, noise)

were measured in accordance with the test

conditions stipulated in EN 60745 and are in-

tended for machine comparisons. They are also

used for making preliminary estimates regard-

ing vibration and noise loads during operation.

The emission values specified refer to the main

applications for which the power tool is used. If

the electric power tool is used for other applica-

tions, with other tools or is not maintained suf-

ficiently prior to operation, however, the vibra-

tion and noise load may be higher when the tool

is used. Take into account any machine idling

times and downtimes to estimate these values

more accurately for a specified time period.

This may significantly reduce the load during

the machine operating period.

6Operation

6.1 Changing the battery pack [2]

The cordless jigsaws can be charged using

any Festool battery pack from the

BPS Li-

Ion and BPC

series.

Risk of injury!

Always remove the belt

clip from battery packs from the BPC se-

ries prior to use.

6.2 Switch on/off

The electric power tool has one button [1-2] on

each side for switching on/off.

The PSBC 400 EB also has a variable speed trig-

ger [1-3] with switch lock [1-4]. For continuous

operation, use the button [1-2].

6.3 Charging the battery pack [3]

The battery pack is delivered partially

charged. To guarantee the full battery pow-

er, charge it completely before using it for

the first time.

Wear protective goggles.

Sound pressure level L

= 88 dB(A)

Noise level L

= 99 dB(A)

Measuring uncertainty

allowance

K = 3 dB

CAUTION

Operating noise

Damage to hearing

Use ear protection!

PSC 400 EB PSBC 400 EB

Sawing wood

Handle a

= 6,0 m/s

= 10.0 m/s

K = 2,0 m/s

Gear

head

= 11,0 m/s

K = 2,0 m/s

Sawing metal

Handle a

= 7,0 m/s

= 11.0 m/s

K = 2,0 m/s

Gear

head

= 12,0 m/s

K = 2,0 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool PSBC400EB Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info