Bedienungsanleitung Festool ro 125 feq-plus (Seite 10 von 62) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

389414

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Gear-drive eccentric sander

Technical data RO 125 FEQ

Power 500 W

Speed 3000 - 6000 rpm

Sanding stroke 3.6 mm

Weight (excluding cable) 1.9 kg

Degree of protection / II

The speciﬁ ed illustrations can be found at the

beginning of the operating instructions.

Graphical symbols

Caution. Danger!

Read the operating instructions/notes

Wear ear protection!

Wear protective goggles!

Wear a protective mask!

1 Intended use

As speciﬁ ed, the machines are designed for sand-

ing and polishing wood, plastic, metal, composite

materials, paint/varnish, ﬁ ller and similar mate-

rials.

Materials containing asbestos must not be proc-

essed.

For reasons of electrical safety the machine must

not be damp nor operated in a humid environment.

The machine may only be used for dry sanding.

The user is liable for damage and injury

resulting from incorrect usage!

2 Before starting up, please observe the

following

2.1 Safety instructions

WARNING! Read all safety warnings and

all instructions. Failure to follow the warnings

and instructions may result in electric shock, ﬁ re

and/or serious injury.

Save all warnings and instructions for future

reference.

The term „power tool“ in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

- Harmful/toxic dusts can occur during your work

(e.g. lead-containing paint, some types of wood

and metal). Contact with these dusts, espe-

cially inhaling them, can represent a hazard for

operating personnel or persons in the vicinity.

Comply with the safety regulations that apply in

your country. Connect the electric power tool to

a suitable extraction system.

To protect your health, wear a P2 protec-

tive mask.

Always wear protective goggles because

of possible dangers when sanding.

- The manufacturer’s handling and processing

instructions must be observed without fail if

explosive or self-igniting dusts are likely to oc-

cur during sanding.

- Prevent the penetration of liquid polish into

the tool. The penetration of liquid polish into

the power tool increases the risk of an electric

shock.

2.2 Noise and vibration information

The typical values determined in accordance with

EN 60745 are:

Sound pressure level 81 dB(A)

Sound-power level 92 dB(A)

Measuring uncertainty allowance K = 3 dB

Wear ear protection!

Vibration emission value a

(vector sum for three

directions) and uncertainty K measured in accord-

ance with EN 60745:

Fine sanding, Polishing a

= 7,5 m/s²

K = 2,5 m/s²

Coarse sanding a

= 4,5 m/s²

K = 2,5 m/s²

The emission values speciﬁ ed (vibration, noise)

were measured in accordance with the test con-

ditions stipulated in EN 60745 and are intended

for machine comparisons. They are also used for

making preliminary estimates regarding vibration

and noise loads during operation.

The emission values speciﬁ ed refer to the main

applications for which the power tool is used. If

the electric power tool is used for other applica-

tions, with other tools or is not maintained suf-

ﬁ ciently prior to operation, however, the vibration

and noise load may be higher when the tool is

used. Take into account any machine idling times

and downtimes to estimate these values more

accurately for a speciﬁ ed time period. This may

signiﬁ cantly reduce the load during the machine

operating period.

3 Power supply and start-up

The mains voltage must correspond to

the speciﬁ cation on the rating plate.

To switch on the machine, press the switch (1.2)

downwards and forwards until it locks into place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ro 125 feq-plus Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info