Bedienungsanleitung Festool ts 75 ebq fs (Seite 14 von 94) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch)

383463

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Technical data TS 75 EBQ/ TS 75 EQ

Power 1600 W

(110 V-Version 13 A)

Speed (idling) 1350 - 3550 rpm

Inclination 0° - 47°

Cutting depth at 0° 0 – 75 mm

Cutting depth at 45° 0 – 56 mm

Saw blade dimensions 210x2.4x30 mm

Weight 6.2 kg

Degree of protection

/II

The speciﬁ ed illustrations can be found at the

beginning of the operating instructions.

Symbols

Warning of general danger

Manual, read the instructions.

Wear ear protection!

Wear protective goggles.

1 Use for intended purpose

These machines are intended to be used for

sawing wood, wood-like materials, plaster and

cement-bonded fibre materials, and plastics.

With the special saw blades for aluminium offered

by Festool, these machines can also be used for

sawing aluminium.

Only saw blades with the following speciﬁ cations

must be used: saw blade diameter of 210 mm;

cutting width of 2.4 mm to 2.6 mm; toolholder

diameter of 30 mm; blade core thickness of max.

1.8 mm; suitable for speeds of up to 5000 rpm.

Do not use any abrasive wheel.

Festool electric power tools should only be in-

stalled in work benches specially designed by Fes-

tool. The electric power tool may become unsafe

and cause serious accident if installed in benches

from other manufacturers or self-manufactured

work benches.

The user is liable for damage and injury

resulting from incorrect usage!

2 Safety instructions

2.1 General safety rules

WARNING! Read all safety warnings and

all instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁ re and/or serious

injury.

Save all warnings and instructions for future

reference.

The term „power tool“ in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

2.2 Tool-speciﬁ c safety rules

1) Cutting procedures

DANGER: Keep hands away from cutting

area and the blade. Keep your second hand

on auxiliary handle, or motor housing. If both

hands are holding the saw, they cannot be cut

by the blade.

b) Do not reach underneath the workpiece. The

guard cannot protect you from the blade below

the workpiece.

c) Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade

teeth should be visible below the workpiece.

d) Never hold piece being cut in your hands or

across your leg. Secure the workpiece to a

stable platform. It is important to support

the work properly to minimize body exposure,

blade binding, or loss of control.

e) Hold power tool by insulated gripping sur-

faces when performing an operation where

the cutting tool may contact hidden wiring

or its own cord. Contact with a „live“ wire will

also make exposed metal parts of the power

tool „live“ and shock the operator.

f) When ripping always use a rip fence or straight

edge guide. This improves the accuracy of cut

and reduces the chance of blade binding.

g) Always use blades with correct size and shape

(diamond versus round) of arbour holes.

Blades that do not match the mounting hard-

ware of the saw will run eccentrically, causing

loss of control.

h) Never use damaged or incorrect blade wash-

ers or bolt. The blade washers and bolt where

specially designed for your saw, for optimum

performance and safety of operation.

i) Wear suitable protection such as

ear protection, safety goggles, a

dust mask for work which gener-

ates dust, and protective gloves

when working with raw materials

and when changing tools.

Circular saw TS 75 EBQ/ TS 75 EQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool ts 75 ebq fs Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info