Bedienungsanleitung Festool TS 75 EQ (Seite 20 von 139) (Alle Sprachen)

497613

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

– Check whether there are any signs of dam

age to the housing components, such as

cracks or stress whitening. Have any dam

aged components repaired before using the

power tool.

–Use appropriate detection devices to look

for any hidden supply lines or consult your

local utility company. If the insertion tool

makes contact with live cables, it can result

in fire and electric shock. Damage to a gas

pipe can lead to an explosion. Penetration

of a water pipe can result in damage to

property.

2.5 Aluminium processing

When sawing aluminium, the following

measures must be taken for safety reasons:

– Connect the power tool to a suitable dust

extractor.

– Regularly clean dust deposits from the mo

tor housing on the power tool.

– Use an aluminium saw blade.

Wear protective goggles.

– When sawing panels, they must be lubrica

ted with petroleum but thin-walled profiles

(up to 3 mm) can be sawed without lubrica

tion.

2.6 Emission levels

The levels determined in accordance

with EN 62841 are typically:

Sound pressure level LPA = 88 dB(A)

Sound power level LWA = 99 dB(A)

Uncertainty K = 3 dB

CAUTION

Noise generated when working

Risk of damage to hearing

► Use ear protection.

Vibration emission level ah (vector sum for

three directions) and uncertainty K measured in

accordance with EN 62841:

Sawing wood ah 3,5 m/s2

K = 2 m/s2

Sawing metal ah 3,5 m/s2

K = 2 m/s2

The specified emission levels (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise

load during operation.

– They represent the primary applications of

the power tool.

CAUTION

The emission values may deviate from the

specified values. This is dependent on how

the tool is used and the type of workpiece

being machined.

► The actual load during the entire operating

cycle must be evaluated.

► Depending on the actual load, suitable pro

tective measures must be defined in order

to protect the operator.

3 Intended use

Circular saws are designed for sawing wood,

materials similar to wood, gypsum and cement-

bonded fibre materials and plastics. When fitted

with the special saw blades for aluminium that

are offered by Festool, these machines can also

be used for sawing aluminium.

Materials containing asbestos must NOT be

processed.

Do not use cutting or abrasive wheels.

This power tool may only be used by experts or

instructed persons.

The user is liable for improper or non-in

tended use.

3.1 Saw blades

Only use saw blades with the following dimen

sions:

– Saw blades according to EN 847-1

– Saw blade diameter 210 mm

– Cutting width 2.4 mm to 2.6 mm

– Locating bore 30 mm

– Standard blade thickness Max. 1.8 mm

– Suitable for speeds of up to 5000 rpm

Festool saw blades comply with EN 847-1.

Only saw materials for which the saw blade in

question has been designed.

4 Technical data

Circular saw TS 75 EBQ, TS 75 EQ

Performance 1600 W

(110 V version: 13 A)

no-load speed 1350–4400 rpm

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Festool TS 75 EQ Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Festool TS 75 EQ

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info