Bedienungsanleitung First Alert DVR0805 (Seite 22 von 47) (Englisch)

795160

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Page 22

Email Tip

Depending upon your settings, the system can generate a lot of email alerts. For that reason, we recommend

setting up a dedicated email address speciﬁcally for the Security System alert notices. Also to better manage

your alerts, you will want the alert emails to go to a different account than the one sending them.

ADVANCED OPERATION

ALARM

Advanced Setup

Use the ADVANCED SETUP menu to conﬁgure alarm settings,

lookup version information, set motion detection, mobile

surveillance, maintain system parameters, set PTZ conﬁgurations

and network settings. The Advanced Setup menu contains

the following sub-menus: Alarm Set, Version, Motion Detect,

Mobile Monitor, Auto Maintain, PTZ Conﬁg, and Network

Alarm

Alarm and Email Options:

To access Alarm the ALARM menu, choose ADVANCED from the Main

Menu and then select ALARM SETv. NOTE: External alarm devices must

be connected to the alarm block on the rear panel of the DVR in order to

use the I/O (input/ output) alarms of the system. See next section “Alarm

Inputs” and “Alarm Inputs Diagram” for details on attaching alarm inputs.

To conﬁgure alarm settings:

1. To activate Loss Alarms use drop down menu and select ON/OFF:

• HDD LOSS: The alarm will sound if the internal

HDD is missing when DVR is started

• DISK NO SPACE: The alarm will sound when the HDD

is full (overwrite must be disabled)

• SHOW VIDEO LOSS: The alarm will sound

when a camera is disconnected

2. Under I/O CHANNEL, select Normal Open, Normal Closed, or

STOP for Alarm input. There are 4 alarm inputs. Alarm Input 1

on Alarm Block controls CH1 1 (Camera 1). Scroll down to view

additional channels. Note: If in the RECORD screen, a Channel

is set to OFF, ALARM is also disabled for that Channel.

3. Under SEND Email and SHOW MESSAGE, select

ON or OFF to activate this option.

4. If MAIL is selected, click on the MAIL button and then ﬁll in the

email information necessary for an email to be sent when the alarm

is detected.

Email Setup:

The system can send an email notiﬁcation for triggered

events on the system. To setup email notiﬁcation:

1. Under Email, select ENABLE.

2. Under SMTP SERVER enter the SMTP address of your

email server. For example, smtp.gmail.com

3. Under PORT, enter the SMTP port of your email server.

4. Check SSL (SECURE SOCKET LAYER) if needed. SSL deals with

encryption. Only advanced users should enable this option.

5. Under USER NAME, enter the email server user’s name.

6. Under PASSWORD, enter the password of your email server.

7. Under SENDER, enter the sender email address.

8. Under RECEIVER, enter the email address that

will receive the email notiﬁcation.

9. Click OK.

Please check with your email service provider’s website for SMTP

server port information and if SSL needs enabling.

Advance Setup Menu

Alarm Setup Menu

Email Setup Screen

Alarm Status

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

First Alert DVR0805 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info