Bedienungsanleitung First Alert DVR0805 (Seite 21 von 47) (Englisch)

795160

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Page 21

BASIC OPERATION

PLAYBACK

Backup

NOTE: The system is compatible with most major brands of

USB ﬂash drives, with capacities from 256 MB to 4 GB.

To backup recorded data:

1. Connect a blank USB ﬂash drive to the Bottom

USB port on the back of the DVR.

2. Perform a search for the records you would like to backup.

Select the ﬁle (s) you want to backup from the ﬁle list.

3. Click BACKUP Icon button , located near the bottom

right of the screen. The BACKUP screen will appear.

4. Click DETECT button so that DVR system recognizes

the USB backup device. Select the backup device by

placing a check in the box next to your backup device.

5. Click BACKUP button in the BACKUP screen,

the BACKUP Sub Screen appears

6. Click START to immediately begin copying the ﬁles to the

USB ﬂash drive

NOTE: Backup progress appears in the status window. DO NOT

remove the USB ﬂash drive during backup. If the space in backup

device is less than recording ﬁle, the system will prompt “Space not

enough”... After backup is complete, you can remove USB device.

HDD Management

Hard Drive and USB Options:

The HDD Manage button displays essential information about the system’s

internal hard drive, and lets you format the internal HDD and external USB

ﬂash drive (not included). To access this menu, from the MAIN MENU click

HDD MANAGE.

The HDD menu displays the following:

1. TYPE: Shows the type of disk Read or Read/Write

2. CAPACITY: The size (in gigabytes) of the internal hard disk drive.

The size of your system`s internal hard drive will vary by model

3. LEFT CAPACITY: The space (in gigabytes)

remaining on the system`s internal HDD

4. STATUS: The system will display “OK” for normal operation

5. HDD FULL: Select OVERWRITE or STOP RECORD. If Overwrite is

enabled, the system will record over the oldest video data once

the HDD is full. If STOP RECORD is enabled, the system will stop

recording once the HDD is full.

Note: The recover button is there for future use.

To Format the Hard Drive:

1. Highlight the hard drive in the HDD MANAGE screen.

2. Click the FORMAT button.

3. The system will ask you to conﬁrm the format operation.

4. Click OK to conﬁrm or CANCEL to return to previous screen.

Formatting the Internal Hard Drive

If you installed a new hard drive, you must format the hard drive in the DVR before it can be used. Clicking on

the HDD Format button will begin the formatting process. After formatting, the system will restart. ATTENTION:

Formatting the internal HDD erases all video data. This step cannot be Undone.

Backup Menu & Warning Notice

HDD Management

Hard Drive Format Warning

Backup ﬁles come formatted in .H264

format. To view these ﬁles from your

PC, install the .H264 software from your

installation CD.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

First Alert DVR0805 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info