795114

First Alert HD6135FB Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
4
LOCKING FEATURES
The locking features are designed to discourage unauthorized removal of the battery or alarm. It is not necessary to activate the locks in single-family
households where unauthorized battery or alarm removal is not a concern.
These Heat Alarms have two separate locking features: one to lock the battery compartment, and the other to lock the Heat Alarm
tothe mounting bracket. You can choose to use either feature independently, or use them both.
Tools you will need: •Needle-nose pliers or utility knife • Standard Flathead screwdriver.
Both locking features use locking pins, which are molded into the mounting bracket. Using needle nose pliers or a utility knife, remove one or
both pins from the mounting bracket, depending on how many locking features you want to use.
Topermanently remove either lock insert a flathead screwdriver between the locking pin and the lock, and pry the pin out of the lock.
Locking Pin
TO LOCK THE BATTERY COMPARTMENT
Donot lock the battery compartment until you have activated the
battery and tested the battery back-up.
1. Activate the battery back-up by removing the
“Pull to Activate Battery Back-Up” tab.
DO NOT remove the battery activation until AC
power is turned on to conserve battery power.
2. Press the Test/Silence button until you hear a brief acknowledge (or
feedback) chirp. The alarm will sound: 3 beeps, pause, 3 beeps, pause.
Ifthe unit does not alarm during testing, DO
NOT lock the battery compartment! Install a
new battery and test again. If the Heat Alarm
still does not alarm, replace it immediately.
3. Using needle-nose pliers or a utility knife,
detach one locking pin fromthe mounting
bracket.
4. Push the locking pin through
the black dot on the label on
the back of the Heat Alarm.
TO UNLOCK THE BATTERY COMPARTMENT
Once the Heat Alarm is installed, you must disconnect it from the AC power
before unlocking the battery compartment.
ELECTRICAL SHOCK HAZARD. Turn off the power to the area where the
Heat Alarm is installed before removing it from the mounting bracket.
Failure to turn off the power first may result in serious electrical shock,
injury or death.
Turn off the AC power at the circuit breaker or fuse box.
1. Remove the Heat Alarm from the mounting bracket. If the unit is locked
to the bracket, see the section “To Unlock the Mounting Bracket.”
2. Disconnect the power connector by gently
prying it away fromthe back of the Heat Alarm.
3. Insert a flathead screwdriver under the head of
the locking pin, and gently pry it out of the battery
compartment lock. (If you plan to relock the
battery compartment, save the locking pin.)
4. To relock the battery compartment, close the
battery door and reinsert locking pin in lock.
5. Reconnect the power connector to the back of the Alarm, reattach the
Heat Alarm to the mounting bracket, and restore the power.
When replacing the battery, always test the Heat Alarm before relocking the
battery compartment.
TO UNLOCK THE MOUNTING BRACKET
ELECTRICAL SHOCK HAZARD. Turn off the power to the area where the
Heat Alarmis installed before removing it from the mounting bracket.
Failure to turn off the power first may result in serious electrical shock,
injuryor death.
Always discharge the branch circuit beforeservicing an AC or AC/DC
Heat Alarm. First, turn off the AC power at the circuit breaker or fuse box.
Next, remove the battery from Alarms with battery back-up. Finally, press
the test button to discharge the branch circuit.
1. Insert a flathead screwdriver between the mounting bracket pin and the
mounting bracket.
2. Pry the Heat Alarm away from the bracket by turning both the screw-
driver and the Heat Alarm counterclockwise (left) at the same time.
TO LOCK THE MOUNTING BRACKET
1. Using needle-nose pliers, detach one locking pin from mounting bracket.
2. Insert the locking pin into the lock located on the pivoting hinge of the
battery door.
3. When you attach the Alarm to the mounting bracket, the locking pin’s
head will fit into a notch on the bracket.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für First Alert HD6135FB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info