Bedienungsanleitung Flex VCE45 H AC (Seite 19 von 284) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

505253

Zoom out

Zoom in

Vorherige Seite

1/284

Nächste Seite

– 3

– Do not use the appliance without the

complete filtering system.

– Please follow the safety regulations ap-

plicable to the materials that are to be

treated.

The appliance allows 2 operating modes:

1 Industry vacuum cleaner mode (socket

not used)

2 Dedusting mode (socket used)

 Connect the suction hose and insert in-

sert the suction nozzle or connect to the

dust-generating device depending on

the operating mode.

ṇ Warning

Do not vacuum without the filter elements;

otherwise, the suction motor can get dam-

aged and this can be hazardous to health

on account of increased release of fine dust

particles.

The horn blows when the air speed falls be-

low 20 m/s.

Note: The horn reacts to negative pres-

sure.

 Set the rotary switch to the correct suc-

tion hose cross-section.

Static charge is deflected by providing

earthing to the connection nozzles. This

prevents the formation of sparks and cur-

rent shocks due to attachments (option)

with electrical conductivity.

– The appliance is equipped with a paper

filter bag fitted with locking lid.

Order No. Safety filter sack: 379.115

(5 pieces)

Note:You can use this appliance to take up

all types of dust up to dust class H. It is stat-

utorily necessary to use a dust collection

bag (see Filter systems for order number).

Note: The appliance is suited as industrial

vacuum cleaner and as dedusting device

for the mobile operation to take up dry, non-

combustible dusts with MAK values.

– Unused flat-fold filters may only be

stored and transported in the packaging

(carton).

Illustration

– The lamella of the flat-fold filter should

not be touched during installation.

ṇ Warning

The flat-fold filter and the safety filter sack

must never be removed during the dust ex-

traction process.

 Release and remove the suction head.

Illustration

 Insert the safety filter sack.

Illustration

 Pull the safety filter sack over the con-

tainer.

 Insert and lock the suction head.

ƽ Danger

No dusts hazardous to health should be

sucked in during wet vacuuming.

Illustration

 Properly insert the connection socket in

the suction connection.

 Push in the connection socket until it

locks into place.

 Turn the suction connection with the

connection socket to the right to close it

tightly.

Note: The accurate fit is ensured by means

of a "bayonet connection".

 Release and remove the suction head.

Illustration

 Pull over the safety filter sack.

Illustration

 Pull out the safety sheet.

 Close the safety filter sack using the

self-adhesive flap.

 Pull the safety filter sack towards the

rear.

Start up

Horn

Anti-static system

Dry vacuum cleaning

Installing the safety filter sack

Wet vacuum cleaning

Close the suction connection

Removing the safety filter sack

19EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flex VCE45 H AC Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info