Bedienungsanleitung Flex VCE45 H AC (Seite 21 von 284) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

505253

Zoom out

Zoom in

Vorherige Seite

1/284

Nächste Seite

– 5

 Set the minimum volume flow for the

suction hose cross section at the rotary

switch.

The scale displays the suction hose cross

section.

Note:To use the appliance as dedusting

device for the mobile operation (processing

tool connected to the vacuum cleaner) the

built-in monitoring must be adjusted to the

connected processing tool (dust-generat-

ing device). This means that the user must

be warned if the minimum volume flow of

20 m/s that is required for the suction is fall-

en short of.

Note: Please refer to the type plate for the

specification of the minimum volume flow in

dependence on the negative pressure.

The appliance has an innovative filter

cleaning system that is particularly effective

with fine dust. The flat pleated filter is auto-

matically cleaned every 15 seconds

through an air jet (pulsating sound).

Note: Automatic filter dedusting is switched

on at the factory.

Note: The automatic filter dedusting func-

tion can only be switched on/ off when the

appliance is switched on.

– To switch off automatic filter cleaning:

 Activate the switch. Indicator lamp in

the switch goes off.

– To switch on automatic filter cleaning:

 Press the switch again. Indicator lamp

in the switch glows green.

 Switch off the appliance at the main

switch.

 Pull out the mains plug.

 Empty the container.

 Vacuum and wipe the appliance inside

and outside with a damp cloth.

Illustration

 Store the suction hose and the mains

cable as shown in the illustration.

 Place the appliance in a dry room and

secure it from unauthorized use.

Caution

Risk of injury and damage! Observe the

weight of the appliance when you transport

it.

Ensure proper fastening of the device dur-

ing transportation.

You need to take the following measures

for dust-free transportation of the device:

 Place the suction hose with attachment

in the delivered transport sack. Close

the transport sack

 Close the suction connection, see wet

vacuuming.

 Remove the suction pipe with the floor

nozzle from the holder. Hold the appli-

ance at the handle and at the suction

pipe to transport it.

 When transporting in vehicles, secure

the appliance according to the guide-

lines from slipping and tipping over.

Caution

Risk of injury and damage! Note the weight

of the appliance in case of storage.

This appliance must only be stored in inte-

rior rooms.

ƽ Danger

First pull out the plug from the mains before

carrying out any tasks on the machine.

Dust extracting machines are safeguards

for the prevention or elimination of hazards

defined in the regulations of BGV A1.

– In order to carry out maintenance work,

the user must disassemble, clean and

service the unit, in so far as this is pos-

sible without endangering maintenance

personnel and other persons. Suitable

precautions include decontamination

Automatic filter cleaning

Turn off the appliance

After each operation

Storing the Appliance

Transport

Storage

Maintenance and care

21EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flex VCE45 H AC Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info