764336
86
Zoom out
Zoom in
Vorherige Seite
1/130
Nächste Seite
753/754
Users Manual
74
In the results summary test, failures are highlighted. An
adjustment is necessary in this example because three
tests show failures. The failures were outside the
±0.5 % tolerance that was selected.
20. Push the Done softkey to keep the data, or the Abort
softkey to erase the data and start again.
See the data entry that was recorded and recall the
table later with the Review Memory softkey during
normal operation. This data can be uploaded to a host
computer that runs compatible DPCTrack2 application
software. See “Communication with a PC”.
Transmitter Adjustment
Note
Always read the transmitter manufacturer’s
instructions to find the adjustment controls and
connection points for your transmitter.
To make calibration adjustments to the transmitter:
1. Push the Done softkey after you review the results
summary.
2. Push the Adjust softkey. The Product sources 0 % of
span (100 °C in this example) and shows these
softkeys:
Go to 100%/Go to 0%
Go to 50%
As Left
Done
3. Adjust the transmitter output for 4 mA and then push
the Go to 100% softkey.
4. Adjust the transmitter output for 20 mA. If HART
adjustments (output Trim and Sensor trim) are
necessary, please refer to the 754 HART Mode Users
Guide.
5. If the span was adjusted in step 4, do steps 3 and 4
until adjustment is no longer necessary.
6. Examine the transmitter at 50 %. If it is in specification,
the adjustment is done. If not, adjust the linearity and
start this procedure again at step 3.
86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fluke 754 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fluke 754

Fluke 754 Bedienungsanleitung - Deutsch - 130 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info