764336
87
Zoom out
Zoom in
Vorherige Seite
1/130
Nächste Seite
Documenting Process Calibrator
Process Instrument Calibration
75
“As Left” Test Run
Proceed as follows to generate and record as left data for
the thermocouple temperature transmitter that was
adjusted.
1. Push the As Left softkey to record as left data.
2. Push the Auto Test softkey to start an automatic
sequence through all the test points, or step through
the tests manually.
3. When the tests are complete, read the error summary
table. See Figure 34.
gks48s.bmp
Figure 34. As Left Data Screen
Unsettled measure or source values are highlighted.
This means that there was an unsettled value
(g annunciator) when the measurement was taken.
4. If all the results are in specification, as they are here,
push the Done softkey. An entry in memory is made for
as left data.
Test Comments
The Product does tasks (custom procedures) that are made
with a host computer and DPCTrack2 application software.
See “Communication with a PC”. A task can show a list of
proposed comments as it operates . When the comment list
is shown, push and and then to select a
comment to be kept with the test results.
Calibrate a Delta-Pressure Flow Instrument
The procedure to calibrate a instrument is the same as for
other instruments, as given before, with these differences:
Source square-root is automatically enabled after the
As Found calibration template is complete.
Measure/Source displays are in engineering units.
The measurement percentage is automatically
corrected for the transmitter’s square-root response,
and is used to calculate instrument errors.
87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fluke 754 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fluke 754

Fluke 754 Bedienungsanleitung - Deutsch - 130 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info