803528
281
Zoom out
Zoom in
Vorherige Seite
1/412
Nächste Seite
33
EN
Always remove the battery before clean-
ing, maintaining or repairing your e-bike.
Ensure that you do not touch and thus
possibly connect contacts when clean-
ing or maintaining the battery.
You risk being hurt and the battery may
su󰀨erdamageifthecontactsarelive.
Do not use a strong water jet or high-pres-
sure cleaner for cleaning. The cleaning
liquid may enter sealed bearings due to
high pressure, dilute the lubricant and in-
crease friction. As a result, rust is formed
which destroys the bearings. Cleaning
with a high-pressure cleaner may dam-
age the electrical system.
The following are not suitable for clean-
ing your FLYER e-bike:
Acids
Fats
Oil
Brake cleaner (only to use on brake
discs)
Solvent-based liquids.
These damage the surfaces and contrib-
ute to wear on the FLYER e-bike.
After use, ensure that you dispose of the
lubricant, cleaning and care products in
an environmentally friendly way. These
substances do not belong in domestic
waste, in the drain or in natural environ-
ments.
Smooth operation and durability of your
FLYER e-bike depend on appropriate
maintenance and care for your FLYER.
Regularly clean your FLYER with
warm water, small amounts of clean-
ing agent and a sponge.
While cleaning the FLYER, always
check your e-bike for cracks, notches
or material deformities.
Damaged parts must be replaced with
original spare parts. Please only ride
your FLYER again after this check
has been carried out.
Have any paint damage removed by
your FLYER specialist retailer.
Further important information concerning care for
your FLYER e-bike is provided on the website of
the respective component manufacturer.
Speed sensor
The speed sensor is used to show the speed in
the FLYER display and correctly calculate the as-
sistance needed.
The speed sensor and the associated spoke magnet
must be fastened so that the distance between the
spoke magnet and the marking position on the speed
sensoris1to5mm.If the distanceisdi󰀨erent,an
error message will appear.
Powersupplytoexternaldevices
YoucanusetheUSBporttochargeexternalde-
vices, e.g. smartphones, that can be powered via
USB. The charging cable of the device can be
connected directly to the FLYER display.
Inordertochargeexternaldevices,yourFLYER
e-bike must contain a charged FLYER battery.
Open the cover of the USB port on the display
and connect the charging cable to it.
Do not place the connected device on
a tilted or unstable place while charg-
ing. Otherwise, it could fall and be-
come damaged.
Do not charge external devices in
rainy weather or connect a wet USB
cable. The USB connection is not wa-
terproof!
You must not connect external de-
vices when riding in the rain and the
USB port must be completely covered
by the protective cap.
After using the USB port, be sure to
rmlytightentherubbercap.
Make sure that the voltage of the USB
port is suitable for your device. (See the
technical data for the voltages)
281

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Flyer Crossocver - Fit 2022 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info