Bedienungsanleitung Flyer Crossocver - Fit 2022 (Seite 283 von 412) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

803528

283

Zoom out

Zoom in

Vorherige Seite

1/412

Nächste Seite

Chargingthebattery

The battery can be charged while it is installed in

the e-bike or once it has been removed.

Safetywarningforthebatterycharger

The name plate on the charger refers to warning

notes and other safety information in connection

with handling the charger. Be sure to read this be-

fore use. Please note the temperature ranges of

the battery and charger:

Battery operating temperature: -5 °C to 40 °C

Battery storage temperature: 10 °C to 40 °C

Charging temperature range: 0 °C to 40 °C

Only use the charger supplied with your

e-bike. Only this charger is designed for

the lithium-ion battery used on your

e-bike.

Completely charge the battery using the

chargerbeforetherstridetoensurefull

battery performance. Read and adhere

to the operating instructions for the

charger when charging the battery. Do

not connect the charger to the mains

socket immediately after a sudden tem-

perature change from cold to warm. It is

possible that condensed water has col-

lected on the contacts and this will lead

to a short circuit. Do not connect the bat-

tery to the charger immediately after a

sudden temperature change from cold to

warm. Wait until both devices have

reached room temperature before con-

necting the charger or the battery.

Only charge and store the battery and

charger in a dry indoor space and keep

themawayfromhotandammableob-

jects.

Donotexposethechargertorainorwet

environments. If water enters the char-

ger, there is a risk of electric shock.

The battery can at any time be charged outside

or installed in the bicycle without reducing its life

span. Interrupting the charging process does not

damage the battery.

The battery is equipped with a temperature mon-

itor that permits charging only within a tempera-

ture range of 0 °C to 40 °C.

In this case, separate the battery from the charger

and wait until it has reached operating tempera-

ture. Only reconnect the charger when it has

reached the permitted operating temperature.

The charger itself can also indicate problems via

theredLEDashing.

Chargerstatusdisplay(LED):

The LED on the charger indicates the following

states:

-ashinggreen-->standby(nobattery connec-

ted)

- continuous red --> battery charging

- continuous green --> battery fully charged

-ashingred-->chargererror

Blinking

patternof

charger LED

Description Action

Blinking red

Charging er-

ror

An error has

occurred in

the battery

or charger.

Charging

cannot be

continued.

Remove any

dirt from the

terminals and

plugs. If the

problem per-

sists, contact

your FLYER

specialist

retailer.

1 Remove the rubber cap

Open the rubber cap on the battery. Connect the

mains plug to a mains socket (220 V – 240 V AC) and

connect the charger to the battery.

Rubber cap

Charger plug

charger

connector

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Crossocver - Fit 2022 Seite 283

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info