Bedienungsanleitung Flyer Gotour6 2024 (Seite 182 von 260) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

803514

182

Zoom out

Zoom in

Vorherige Seite

1/260

Nächste Seite

176

Clean and maintain your e-bike after every

ride to prevent functional impairments due

to dirt.

Instructions for cleaning your e-bike and

its components can be found in chapter 8

“Cleaning and care”.

Important: After cycling in rain,

snow or wetconditions, you must

carry out the following steps to pre-

vent immediate loss of function of

the affected components.

• Clean the chain and then oil it with a suitable

lubricant approved by the manufacturer.

• Clean the brake and gear shift compo-

nents.

• Check that all components are sufficiently

lubricated.

Ask your FLYER specialist dealer

to instruct you as to which components

need to be oiled and how to carry out this

task.

7.3 Regular inspection of

the components

• Check your e-bike every six months for

signs of wear (see chapter 9 “Mainte-

nance and replacement of wear parts”).

7.4 After a fall

Important: Do NOT continue

cycling after a fall and do not simply

screw loose parts back into place.

Have your e-bike and all compo-

nents checked by a FLYER special-

ist dealer first.

WARNING!

Risk of accident

In the case of components made of

composite materials (e.g. carbon),

damage might not be apparent to the

cyclist.

• After an accident or tip-over, com-

posite components must either be

sent to the manufacturer for inspec-

tion or be destroyed and replaced.

A professional check after a fall includes the

following points in particular:

• The frame and fork must be carefully

checked.

Deformations can usually be clearly seen

from various angles across the surfaces.

• Are the saddle, seat post, stem and han-

dlebars still in the correct position?

If this is not the case, DO NOT move

the component back from its changed

position without opening the associated

screw connection. Observe the specified

tightening torque when reaffixing.

Torque: See the model-specific

information in the applicable Tech-

nical Data document.

• Test that both wheels are seated correctly

and securely in the frame and fork and

that the front and rear wheels turn freely.

In the case of wheel sets with disc brakes, an

expert can see from the distance between

the tire and the frame or fork whether the

concentricity of the wheel is intact.

• Test both brakes for full function.

• Is the chain or belt resting securely on the

chainring and pinion or on both pulleys?

• Check whether an error message or a

warning appears on the display of the

e-bike.

Do not ride your e-bike if a warning is

displayed, but rather contact your FLYER

specialist dealer immediately.

• Check that the display and battery are

undamaged.

Do not ride your e-bike if there are any

changes (cracks, scratches, etc.). First have

your FLYER specialist dealer check all com-

ponents and replace them if necessary.

WARNING!

Risk of electric shock

If the outer casing of the battery is dam-

aged, there is a risk of moisture or

water penetration. This can lead to

short circuits and electric shocks.

• Never use or charge a damaged bat-

tery!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Gotour6 2024 Seite 182

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info