Bedienungsanleitung Flyer Gotour6 2024 (Seite 184 von 260) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

803514

184

Zoom out

Zoom in

Vorherige Seite

1/260

Nächste Seite

178

8 Cleaning and care

Important: Clean and maintain

your e-bike and the components

installed on it as described in this

chapter to prevent functional losses

and premature wear.

Important: If possible, remove the

battery before cleaning.

WARNING!

Risk of accident and injury

The use of unsuitable cleaning agents,

lubricants or care products can cause

damage and reduced functionality of

your e-bike or safety-relevant compo-

nents, resulting in accidents and seri-

ous injuries.

• Note that not all lubricants and care

products are suitable for your e-bike

or its components.

• Only use cleaning agents and lubri-

cants recommended or approved by

the component manufacturer.

• Do not allow cleaning or mainte-

nance products or oils to get on

brake pads, brake discs and brake

rim surfaces as this will reduce

brake performance.

Frame and wheel set

• Clean the frame of your e-bike, the wheel

set and fenders with a damp cloth with

clean water or, if necessary, with mild

soapy water. Afterwards, wash off the

soap suds with clear water.

Important: Never clean your e-bike

with a high-pressure cleaner, com-

pressed air or spray your e-bike

with a hose for cleaning. This could

cause damage to the components

of the electric drive system, among

other things.

Operating elements

• Clean the operating elements with a dry

or slightly damp cloth.

Make sure that no liquid gets into the

housings of the electrical control ele-

ments.

Chain drive components

• Clean the chain and both sprockets with a

clean and lightly oiled cloth or soft brush.

• Oil the chain with universal oil after every

cleaning, after cycling in the rain or after

the chain has become very wet for any

other reason and regularly after about 15

hours of use.

Components of belt drives

Important: Belt drives are NOT

oiled or greased!

• Clean the profiles of belts and pulleys dry

with a soft brush or, if necessary, with mild

soapy water. Afterwards, wash off the

soap suds with clear water.

• Carefully remove any trapped dirt or

small stones with a plastic pin. Do not

use sharp-edged tools under any circum-

stances!

Electric drive components

• Follow the instructions for cleaning the

individual drive components in the corre-

sponding manufacturer's manual for your

electric drive.

Disc brakes

• Clean dirty brake discs with a suitable

brake cleaner approved by the manufac-

turer.

Rim brakes

• Clean dirty brake pads, rims and brake

cables with a slightly damp cloth.

Coaster brake

The coaster brake is installed in the rear

hub, which means that its components do

not have to be cleaned separately.

Suspension components

• Clean the suspension elements with a

clean and lightly oiled cloth or soft brush.

• Lubricate the suspension elements with an

original lubricant from the suspension ele-

ment manufacturer after every cleaning,

after cycling in the rain or after they have

become very wet for any other reason.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Gotour6 2024 Seite 184

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info