Bedienungsanleitung Flyer RS serie - Panasonic (Seite 164 von 275) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Norwegisch)

732994

164

Zoom out

Zoom in

Vorherige Seite

1/275

Nächste Seite

162

19.3 Roof and rear carrier on a car

• Only use rear carriers which satisfy

the applicable national legislation for

transporting your bike by car. The use

of rear carriers may lead to accidents.

• Adjust your driving according to the

weight of your rear carrier.

• In the case that you attach a trailer

to the bike, make sure to regularly

check if it is securely fastened to the

FLYER e-bike. If your FLYER falls out

of the carrier, it can cause serious ac

cidents.

• Avoid transporting your FLYER on the

roof of a vehicle and always cover the

motor with a rain protector cover to

prevent it from becoming damaged.

It is recommended to cover the entire

FLYER e-bike with a rain protection

cover.

• Please note that loose parts, such as

tools, luggage and tool bags, child

seats, air pumps etc. could fall off dur

ing transport. This may put other peo-

ple on the road at risk. All loose parts

should therefore be removed from the

FLYER before you start riding.

• A roof rack changes the total height of

your vehicle.

• Also make note of the maximal load

capacity for the roof of the vehicle.

The brake lever may not be used when

your bicycle is lying sideways, upside

down or if a wheel has been removed.

Otherwise air bubbles can enter the hy

draulic system which could cause the

brakes to fail. After transporting the bicy

cle, check if the pressure point of the

brakes seems softer than before. Then

apply the brakes slowly several times.

This allows the braking system to dis

charge any bubbles. If the pressure

point remains soft, please refrain from

riding. A FLYER specialist retailer must

discharge the air from the brake system.

You can avoid this problem by applying

the brake lever before transport and

then xing it in this position using a

strap. This prevents any air from enter

ing the hydraulic system. Please note

that the brake lever may not be pulled

when the wheel has been removed.

Place a spacer between the brake

blocks if you need to remove the wheel.

The driver is responsible for transport by car in

compliance with the applicable laws and regula

tions. Biketec AG cannot be held liable in connec-

tion with the transportation of the FLYER on roof

or rear carriers.

• Do not transport your e-bike upside

down. When securing the bike, en

sure that no damage is caused to the

fork or the frame.

• You may not attach your e-bike to

the roof rack or rear carrier by its

crank set. The e-bike must always be

transported standing on its wheels.

Non-compliance may result in dam

age to the e-bike.

• When transporting the e-bike by car,

the battery must be removed and

transported separately. Make sure

that the battery contacts are safe from

short circuiting.

Public transport

Obtain information regarding the local regulations

when you intend to transport your e-bike on public

transportation.

Aircraft

Obtain information regarding the legal guidelines

if you intend to transport your FLYER by aircraft.

Ask your airline.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer RS serie - Panasonic Seite 164

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Flyer RS serie - Panasonic

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info