732994
166
Zoom out
Zoom in
Vorherige Seite
1/275
Nächste Seite
164
20.1 Using quick releases
Quick releases are systems installed on the bicy-
cle in place of bolted connections. They consist of
two parts: the clamping lever, which provides the
necessary clamping force, and the locking nut,
which allows you to regulate the clamping force.
You can change the setup of your quick release
when the clamping lever is open.
You will know if the quick release and
locking lever have been closed with the
proper gripping force when you feel
pressure half way through closing them.
Just before it closes, you should have to
apply extra force with the ball of your
thumb to close the lever completely.
All quick release skewers must be
rmly closed before you set off.
Check all quick release fasteners for
correct attachment if the vehicle was
parked for a short time without super
-
vision and before every ride.
A closed quick release fastener must
be folded close to the frame, fork or
seat post.
In addition to closing the folding bike,
you should also lock up the bike with a
separate locking device, i.e. with a cable
lock. By doing so, you will prevent your
bike from being stolen.
20.2 Adjusting and readjusting the
frame’s folding hinge
After 500 folds or when the gripping
force decreases, let your FLYER retailer
check the gripping force on the folding
hinge.
Proper gripping force of the
folding hinge: 10kg/98.1N
Tightening the Adjusting
Nut
Loosening the Adjusting
Nut
20.3 Folding instructions for the
FLYER Pluto
The riding system must always be
switched off before beginning the folding
procedures.
To make it easier and safer to fold your FLYER
Pluto, the bike has been equipped with quick re
-
lease fasteners in all the places most important.
Before beginning to fold the bike, re-
move the key from the battery and bike
lock.
Fold up the bike stand on your
FLYER Pluto in such a way that it won’t
fall unto the motor.
Before the folding process place the
crank horizontally or turn the left pedal
downwards and leave it in this position.
1. First fold the pedals of your FLYER Pluto.
Press the pedals towards the crank (1) and turn
them down 90° (2).
2. Stand on the left side of the bike. Open the
quick release (1) and press the seat post all the
way down (2).
1
2
166

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Flyer RS serie - Panasonic wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Flyer RS serie - Panasonic

Flyer RS serie - Panasonic Bedienungsanleitung - Holländisch - 56 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info