Bedienungsanleitung Flyer Tour - Panasonic 2018 (Seite 147 von 224) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

780034

147

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

144 145

Please take note that the right pedal is different

from the left. You can recognise which pedal be-

longs on which side from the screws which turn in

opposite directions. Usually, an “R” is embossed

on the right pedal with an “L” on the left. Screw the

right pedal clockwise and the left pedal anti-clock-

wise into the cranks.

The pedals must be fastened with a suit-

able spanner. Adhere to the correct fas-

tening torque when screwing on the ped-

als, see “Technical data”. Ensure that

the pedals are tted straight. If they are

tted at an angle, there is a danger of

breaking and of having a fall!

For safety reasons, we strongly advice

not using pedals with clips or straps.

Ensure that you have read the manufac-

turer‘s instructions before using magnet-

ic or clipless pedals. Practise clipping

your shoes in and out of the pedals‘ lock-

ing system before your rst ride in a qui-

et, safe place. Clipless pedals which do

not properly release are a safety hazard.

The release force of system pedals can

be adjusted. Please test this on your rst

ride with a setting that releases easily.

Regularly clean the system pedals and

service them with a suitable lubricant.

11.1 Operating quick releases and

axles

The wheels, seat post, seat, stem and handlebars

may be attached with quick release fasteners,

quick release axles or screw connections.

• Check whether the display of the FLYER e-bike

shows a fault message or a warning. Do not

drive your FLYER when a warning is displayed.

Immediately contact your FLYER specialist re-

tailer.

• Check that the display and the battery are un-

damaged. Do not ride your FLYER if there are

any noticeable changes (cracks, scratches,

etc.). Have all parts and functions rst checked

by your FLYER specialist retailer.

There is a risk that humidity or water

may penetrate the motor if the housing

of your battery is cracked. This may lead

to short circuits or electrical shocks. Im-

mediately stop using the battery in this

case and contact your FLYER specialist

retailer. Do not charge the battery.

If you notice any changes to your bicycle, DO

NOT continue cycling. Do not retighten any loose

parts without rst checking them and always use

a torque wrench. Take the FLYER to your FLYER

specialist retailer, describe the fall to them and

have the bicycle checked out!

11. Adjusting the

bike to the rider

Installing pedals

Always have your pedals installed or changed

by your FLYER specialist retailer, and feel free to

ask for advice their correct handling. Pedals must

be installed with a suitable spanner. Please note

that the two pedals are screwed on in different

directions and must be fastened with high torque

(see “Technical data”). Apply assembly grease to

both threads.

Direction

* see “Technical data”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Tour - Panasonic 2018 Seite 147

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info