Bedienungsanleitung Flyer Tour - Panasonic 2018 (Seite 172 von 224) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

780034

172

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

170 171

21. Electrical motor

All information, data and instructions concerning

the electrical system of your FLYER e-bike are

included in the attached operating instructions

for the electrical support system installed in your

FLYER. They include details of the operation and

maintenance, all important safety instructions and

information concerning the following components:

• Operating element and display

• Battery and possible ranges

• Charger

• Drive unit

• Speed sensor and spoke magnet

Some general facts concerning the function and

range of your FLYER's motor are listed below:

Function:

The motor starts working as soon as you start

pedalling when one of the support modes has

been selected.

The performance of the motor depends on sev-

eral factors:

• The force used while pedalling

The support is more gentle when you pedal

with low force than when you pedal with higher

force, e.g. while driving uphill. However, this in-

creases the power consumption and decreas-

es the range.

• Support mode

The higher the level of support, the more pow-

er the motor will provide. However, high motor

performance means high power consumption.

The lowest support mode provides the least

support but also the longest range.

Range

Specied range information has been obtained

under optimal conditions. Ranges achieved un-

der everyday conditions will usually be shorter.

Please consider this when planning your route.

The range depends on many factors. These in-

clude battery capacity, motor support level select-

ed, geographical conditions, road surface, driving

style, environmental temperature, the weight of

the driver, tyre pressure and the technical state of

your FLYER e-bike.

Driving without drive support

You can also drive your FLYER without drive sup-

port by selecting the “No assist” support mode.

Ensure that your system is always switched on.

Never drive without a battery or with

your system switched off, as the func-

tions of the operating unit and the light-

ing functions are not available in this

case.

Always remove the battery before clean-

ing, maintaining or repairing your e-bike.

Ensure that you do not touch and thus

possibly connect contacts when clean-

ing or maintaining the battery. You risk

being hurt and the battery may suffer

damage if the contacts are live.

Do not use a high pressure water stream

or a high pressure cleaner on your bike.

The cleaning liquid may enter sealed

bearings due to high pressure, dilute

the lubricant and increase friction. As a

result, rust is formed which destroys the

bearings. Cleaning with a high-pressure

cleaner may damage the electrical sys-

tem.

You should avoid doing the following

when cleaning your FLYER e-bike:

• Acids

• Fats

• Oil

• Brake cleaner (only to use on brake

discs)

• Solvent-based liquids.

These damage the surfaces and contrib-

ute to wear on the FLYER.

After use, ensure that you dispose of the

lubricant, cleaning and care products in

an environmentally friendly way. These

substances do not belong in domestic

waste, in the drain or in natural environ-

ments.

Smooth operation and durability of your

FLYER e-bike depend on appropriate

maintenance and care for your FLYER.

• Regularly clean your FLYER with

warm water, small amounts of clean-

ing agent and a sponge.

• While cleaning the FLYER, always

check your e-bike for cracks, notches

or material deformities.

• Damaged parts must be changed with

original spare parts. Please only ride

your FLYER again after this check

has been carried out.

• Have possible paint damage removed

by your FLYER specialist retailer.

Further important information concerning care for

your FLYER e-bike is provided on the website of

your respective component manufacturer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Tour - Panasonic 2018 Seite 172

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info