Bedienungsanleitung Flyer Tour - Panasonic 2018 (Seite 174 von 224) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

780034

174

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

172 173

• Check the tension of the spokes

• Clean the chain and sprockets as required

and lubricate them with a suitable chain oil ap-

proved by the manufacturer

• If necessary, clean the brake discs with a suit-

able brake cleaner approved by the manufac-

turer

• Clean all bearings as required and lubricate

them with suitable lubricant approved by the

manufacturer

• Clean suspension elements as required and

lubricate them with original lubricant approved

by the suspension manufacturer

• Clean all moving parts for which lubrication is

intended (especially quick release fasteners,

quick release axles and the joints) as required

and lubricate them with a suitable lubricant ap-

proved by the manufacturer

Allow your FLYER specialist retailer to instruct

you.

What to do after riding in rain, snow or wet

conditions:

(in addition to the points under “After each ride”)

FLYER driver

• Clean the chain and lubricate it with a suitable

lubricant approved by the manufacturer

• Clean the brake

• Clean the gear system

• Check the sufcient lubrication of all compo-

nents

Allow your FLYER specialist retailer to instruct

you.

Monthly – FLYER driver

Check that all screws, nuts, quick release axles

and quick release fasteners are rmly attached

Every year or after every 1000 km, whichever

occurs rst

FLYER specialist retailer

• Lubrication of all moving parts for which lubri-

cation is intended (excluding brake surfaces)

• Visual inspection of the frame and of

components for cracks and damage

• Mend paint damage

• Replace parts with rust spots

• Treat all bare metal parts (excluding brake sur-

faces) against corrosion (rust)

• Change defective or damaged parts

• Check the wheels and centre them as required

• Check the tension of the spokes

• Check and clean the chain/sprocket/cogset

• Lubricate the chain with a suitable lubricant

• Check the rim for wear

• Check the brake pads for wear

• Check that all screws, nuts, quick release axles

and quick release fasteners are rmly attached

• Check the brake system and quick release ax-

les and adjust it or replace parts if necessary

• Check the gear system and adjust or replace

parts of it if necessary

• Check the hubs

• Check the headset

• Check the pedals

Only use cleaning agents and lubricants

that are recommended or approved by

the component manufacturer.

Please note that not all lubricants and

care products are suitable for your

FLYER. By using unsuitable lubricants

or care products, you can damage or im-

pact the functionality of your FLYER

e-bike.

Ensure that the brake pads, brake discs

and brake surfaces are not exposed to

cleaning or servicing uids or oils, as this

reduces the performance of the brakes.

23.1 Maintenance work and ex-

change of wearing parts

Components to be changed may only be

replaced with identical, original parts.

Wearing parts may only be replaced with

identical, original components.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Tour - Panasonic 2018 Seite 174

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info