Bedienungsanleitung Flyer Urban - Bosch 2016 (Seite 137 von 249) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Norwegisch)

780045

137

Zoom out

Zoom in

Vorherige Seite

1/249

Nächste Seite

135

Any liability or warranty provided by the FLYER re-

tailer or manufacturer will not apply if you abuse or

misuse the product by neglecting the safety infor-

mation given to you. The same applies if the FLYER

is overloaded, ridden on unsuitable terrain or if man-

ufacturing defects are unprofessionally dealt with.

The guidelines for servicing, care and storage must

be observed in order to retain liability and warranty.

Your FLYER is not designed to withstand extreme

use, i.e. riding down stairs, performing tricks/

jumps/stunts or racing in ofcial competitions.

FLYER e-bikes aren’t designed to be used in

competitions or races.

If you have any questions regarding the bike’s

limit of use, please don’t hesitate to contact your

FLYER retail store or manufacturer.

Before riding on public roads with your FLYER,

inform yourself on the current riding regulations in

your country. Only ride on pathways and trails that

are permitted for vehicles.

8. Before the rst ride

Ensure that the e-bike is ready for use and ad-

justed to t your body.

This includes:

• Setting the position and xture of the seat and

handlebars

• Adjusting the brakes

• Securing the wheels into the frame and fork

To ensure that you enjoy a safe and comfortable

riding position, please allow your FLYER special-

ist retailer to set up your handlebars and stem.

Have the saddle set to a safe and comfortable

position (see Chapter 11.2).

Have the brake handles set by the FLYER spe-

cialist retailer so that you can reach them easily

at all times and can use the brake without getting

tired. Be sure to familiarize yourself with the brake

levers connected to the front and back wheels –

the left brake lever is usually for the front wheel

and the right lever is usually for the back one! De-

spite this general rule, however, you should still

check what wheels the brakes are connected to

since this standard isn't always followed.

Before each ride, and anytime your bike has

been left unattended for a short period of time,

make sure to check if each screw, quick-release

lever, thru axel or other important components

are properly secured where they belong. A table

listing the most important screw connections and

the prescribed fastening torques is provided in

Chapter 23.2, while notes on the correct use of

quick release fasteners and quick release axles

are provided in Chapter 11.1.

When you are driving with clipless/step-in pedals:

Functional testing is required. The pedals should

release easily and smoothly.

Check the tyre pressure. The manufacturer guide-

lines which may not be exceeded or undercut are

printed on the side of the tyres.

It is also necessary for you to check the following

components of your e-bike:

• Please check that the battery is secure.

• Check the charging state of the battery to ensure

that the charge is sufcient for the drive planned.

• Familiarise yourself with the functions of the

operating element.

Familiarize yourself with your

new FLYER e-bike’s riding and handling

performance by testing its features out in

a safe and quiet area.

Only use a FLYER with a frame size that

suits you. Ensure that your legs have

enough room to manoeuvre. You must be

able to dismount quickly without touching

the frame. Insufcient clearance or room

to manoeuvre may lead to severe injuries.

Please note that while preparing to mount

your FLYER that it will immediately start

moving as soon as you put your foot onto

the pedal when the support mode is

switched on. Do not place your foot on the

pedal when mounting. Hold the brake, as

the unfamiliar thrust may otherwise lead

to falls or other accidents. Stand to one

side of the FLYER and lift your leg over

the e-bike. Firmly hold the handle bars

with both hands, as you would do with a

bicycle. Always remember to fold in the

prop stand before riding off.

30 - 80 PSI (2.5-5.5 BAR)

Example of tyre pressure information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Urban - Bosch 2016 Seite 137

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info