ENGLISH - 4
Service Recommendations
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.
Environmental Information
•
Awareness of the environment must be considered when
disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal
i
nformation.
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
e
lectrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
o
therwise be caused by inappropriate waste handling of this product.
F
or more detailed information about recycling of this product, please
contact your local council office, your household waste disposal
s
ervice or the shop where you purchased the product.
Guarantee and Guarantee Policy
If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna UK Ltd., through its
Authorised Service Repairers will effect the repair or
replacement to the customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
a
djustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken
apart or tampered with by any person not authorised by
H
usqvarna UK Ltd.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way diminishes
the customers statutory rights.
Failures due to the following are not covered, therefore it is
important that you read the instructions contained in this
Operator's Manual and understand how to operate and
maintain your machine:
Failures not covered by guarantee
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance
with the instructions and recommendations contained in this
Operator's Manual.
* Machines used for hire are not covered by this
g
uarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular maintenance
and are, therefore not normally subject to a valid warranty
c
laim: Blades, Electric Mains cable
*
Caution!
Husqvarna UK Ltd. does not accept liability under the
warranty for defects caused in whole or part, directly or
indirectly by the fitting of replacement parts or additional
parts that are not either manufactured or approved by
Husqvarna UK Ltd., or by the machine having been
modified in any way.
Husqvarna AB, S-561 82 Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation.............................
Lawnmower
Designation of Type(s)............
C340VC, C370VC
Identification of Series............
See Product Rating Label
Year of Construction...............
See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77
The maximum A weighted sound pressure level L
pA
at the operator’s position, measured according to EN60335-2-77 is given in
the table.
The maximum hand / arm vibration weighted value a
h
measured according to EN ISO 20643 on a sample of the above
product(s) is given in the table.
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated figures.
Conformity Assessment Procedure........................Annex VI
Notified Body.......................................................... Intertek, Davy Avenue,
Knowlhill, Milton Keynes,
Bucks., MK5 8NL, England
Huskvarna, 22/01/2013
P. Lameli
Chief Technical Officer
Keeper of technical documentation
EC DECLARATION OF CONFORMITY
Type
Width of Cut (cm)
Speed of rotation cutting device (rpm)
Power (kW)
Measured Sound Power L
WA
(dB(A))
Guaranteed Sound Power L
WA
(dB(A))
Sound pressure L
pA
(dB(A))
Uncertainty K
pA
(dB(A))
Hand / arm vibration a
vhw
(m/s
2
)
Uncertainty K
ahw
(m/s
2
)
Weight (Kg)
C340VC
34
3700
1.4
94
96
78.2
2.5
1.79
1.5
10.8
C370VC
37
3600
1.6
93
96
82.1
2.5
2.7
1.5
11.2
5765592-02 Flymo Chevron 34VC-37VC Euro.qxp_???????-01 Visimo-Easimo Euro(Cleva) 08/01/2016 11:41 Page 11
