Gas hook up (LP gas is Standard).
Open the front door, install a standard 20lb LP cylinder (Type 1) into the
opening of the grill base (Note: the tank must be hanging from the tank
hook) and connect the LP gas hose with regulator assembly to the LP
cylinder.
Proper procedures for gas leakage testing must be obeyed. Please note
the Gas Hook-Up, Danger, and Warnings pages for more information.
The LP-gas cylinder valve connection device must properly and safely
mate with the connection device attached to the inlet of the (supplied)
pressure regulator.
Always keep cylinder in upright orientation to provide vapor withdrawal!
Note:
The outdoor cooking gas appliance and its individual shutoff must be disconnected from the gas supply
piping system during any pressure testing of that system at test pressures in excess of 0.5 psi (3.5kPa).
The outdoor cooking gas appliance must be isolated from the gas piping system by closing its individual
manual shutoff during any pressure testing of the gas piping system at test pressures equal to or less
than 0.5 psi(3.5kPa).
