Warning: Before Lighting, please make sure that the control knob is
in the off position and the regulator assembly is in good condition.
Control Knob. IMPORTANT Do not leave items on or against the
barbecue. Keep flammable product and sprays away.
For outdoor use only.
SHUT DOWN INSTRUCTIONS:
1.Turn burner control knob to the OFF position.
2.Turn gas supply OFF.
3.The gas supply must be turned off when appliance is not in use.
LIGHTING INSTRUCTIONS
1. Read instructions before lighting.
2. Open lid during lighting and make sure burner is in the OFF
position. Make sure the burner kit is properly fixed with respect
to the orifices. Control knob must be in the “OFF” position.
3. Turn on tank valve or gas supply and do the leak testing as the
procedures shown in the manual.
4. Push and turn the control knob to “HIGH”. Push the igniter
button. The burner should light. If it does not, repeat up to three
times.
5. If ignition does not occur within 5 seconds, turn the burner control
knob “OFF”, wait 5 minutes for any excess gas to dissipate.
Repeat step 1 through 5.
6. After burners are lit, turn knob to the ◉ zone to operate the dual
zone burners (FIGB) at 21k BTU/hr or ○ zone to operate outer
ring at 15k BTU/hr for indirect heat.
MATCH LIGHTING:
1. Repeat step 1 through 3 in the previous lighting instructions; put
a match into the lighting rod, light the match and place it
through the hole of flame tamer to the burner tube; Push control
knob and turn slowly to the START/ALLUMER position.
2. If ignition does not occur within 5 seconds, turn the burner
control off, wait 5 minutes for any excess gas to dissipate.
3. After burners are lit, turn knob to the ◉zone to operate the dual
zone burners inner and outer ring ◉ at 21k BTU/hr or○zone to
operate outer ring ○ at 15k BTU/hr for indirect heat.
Important: Always use the lighting rod (include) when lighting
burners with a match.
