Bedienungsanleitung Fuji Bike (Seite 7 von 67) (Englisch)

540674

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

B.Safety first

1. Always wear an approved helmet when riding your bike, and follow the helmet manufacturer’s instructions for fit, use and

care.

2. Do you have all the other required and recommended safety equipment? See Section 2. It’s your response- bility to familia

rize yourself with the laws of the areas where you ride, and to comply with all applicable laws.

3. Do you know how to correctly secure your front and rear

wheels? Check Section 4.A.1 to make sure. Riding with an

improperly secured wheel can cause the wheel to wobble or disengage from the bicycle, and cause serious injury or death.

4. If your bike has toeclips and straps or clipless (“step-in”) pedals, make sure you know how they work (see Section 4.E).

These pedals require special techniques and skills. Follow the pedal manufacturer’s instructions for use, adjustment and care.

5. Do you have “toe overlap”? On smaller framed bicycles your toe or toeclip may be able to contact the front wheel when a

pedal is all the way forward and the wheel is turned. Read Section 4.E. to check whether you have toeclip overlap.

6. Does your bike have suspension? If so, check Section 4.F. Suspensio

n can change the way a bicycle performs. Follow the

suspension manufacturer’s instructions for use, adjustment and care.

C. Mechanical Safety Check

Routinely check the condition of your bicycle before every ride.

□Nuts, bolts screws & other fasteners: Because manufacturers use a wide variety of fastener sizes and shapes made in a

variet

y of materials,often differing by model and component, the correct tightening force or torque cannot be generalized. To

make sure that the many fasteners on your bicycle are correctly tightened, refer to the Fastener Torque Specifications in

Appendix D of this manual or to the torque specifications in the instructions provided by the manufacturer of the component in

question. Correctly tightening a fastener requires a calibrated torque wrench. A professional bicycle mechanic with a torque

wrench should torque the fasteners on you bicycle. If you choose to work on your own bicycle, you must use a torque wrench and

the correct tightening torque specifications from the bicycle or component manufacturer or from your dealer. If you need to make

an adjustment at home or in the field, we urge you to exercise care, and to have the fasteners you worked on checked by your

dealer as soon as possible.

WARNING: Correct tightening force on fasten

ers –nuts, bolts, screws– on your bicycle is important. Too little

force, and the fastener may not hold securely. Too much force, and the fastener can strip threads, stretch, deform

or break. Either way, incorrect tightening force can result in component failure, which can cause you to loose control

and fall.

□Make sure nothing is loose. Lift the front wheel off the ground by two or three inches, then let it bounce on the ground.

Anything sound, feel or look loose? Do a visual and tactile inspection of the whole bike. Any loose parts or accessories? If so,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fuji Bike Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info