Bedienungsanleitung Fuji Bike (Seite 8 von 67) (Englisch)

540674

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

secure them. If you’re not sure, ask someone with experience to check.

□Tires & Wheels: Make sure tires are correctly inflated (see Section 4.G.1). Check by putting one hand on the saddle, one on

the intersection of the handlebars and stem, then bouncing your weight on the bike while looking at tire deflection. Compare what

you see with how it looks when you know the tires are correctly inflated; and adjust if necessary.

□Tires in good shape? Spin each wheel slowly and look for cuts in the tread and sidewall. Replace damaged tires before riding

the bike.

□Wheels true? Spin each wheel and check for brake clearance and side-to- side wobble. If a wheel wobbles side to side even

slightl

y, or rubs against or hits the brake pads, take the bike to a qualified bike shop to have the wheel trued.

CAUTION: Wheels must be true for rim brakes to

work effectively. Wheel trueing is a skill which requires special

tools and experience. Do not attempt to true a wheel unless you have the knowledge, experience and tools

d to do the job correctly. neede

side o

□Wheel rims clean and undamaged? Make sure the rims are clea

n and undamaged at the tire bead and, if you have rim

brakes, along the braking surface. Check to make sure that any rim wear indicator marking is not visible at any point on the wheel

rim.

WARNING: Bicycle wheel rims are subject to wear. Ask your dealer about wheel rim wear. Some wheel rims have

a rim

wear indicator which becomes visible as the rim’s braking surface wears. A visible rim wear indicator on the

f the wheel rim is an indication that the wheel rim has reached its maximum usable life. Riding a wheel that is at

the end of its usable life can result in wheel failure, which can cause you to loose control and fall.

□Brakes: C

heck the brakes for proper operation (see Sections 4.C). Squeeze the brake levers. Are the brake quick-releases

closed? All control cables seated and securely engaged? If you have rim brakes, do the brake pads contact the wheel rim

squarely and make full contact with the rim? Do the brakes begin to engage within an inch of brake lever movement? Can you

apply full braking force at the levers without having them touch the handlebar? If not, your brakes need adjustment. Do not ride

the bike until the brakes are properly adjusted by a professional bicycle mechanic.

□Wheel retention system: Make sure th

e front and rear wheels are correctly secured. See Section 4.A

□Seat post: If your seat post has an over-center cam action fastener f

or easy height adjustment, check that it is properly

adjusted and in the locked position. See Section 4.B.

□Handlebar and saddle alignment: Make sure the saddle and handlebar stem are parallel to the bike’s center line and

clamped tight enough so that you can’t twist them out of alignment. See Sections 3.B and 3.C.

□Handlebar ends:

Make sure the handlebar grips are secure and in good condition. If not, have your dealer replace them.

Make sure the handlebar ends and extensions are plugged. If not, have your dealer plug them before you ride. If the handlebars

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fuji Bike Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info