Bedienungsanleitung Fujifilm Finepix 2600 (Seite 38 von 47) (Englisch)

101066

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

74 75

Notes on the Power Supply

h Use AA-size nickel-metal hydride (Ni-MH) batteries in this

camera.

AA-size lithium or manganese batteries cannot be used as

they emit heat and can cause camera faults or damage.

hOnly use alkaline batteries for emergencies. The

capacities of alkaline batteries vary depending on the

brand and the life of some batteries (the time for which

they provide power) may be much shorter than others.

You should also switch the LCD monitor off when using

alkaline batteries.

h Do not store batteries in very warm or moist locations.

h Keep the batteries out of the reach of babies and small

children.

When loading the batteries in the camera, ensure that the

battery polarity (

= and -

) is as indicated on the camera.

h Do not use new batteries together with used batteries. In

the case of rechargeable batteries, do not use charged

and discharged batteries together. Do not use batteries

of different types or brands together.

h If you do not intend to use the camera for a long period of

time, remove the batteries from the camera. (Note that if

the camera is left with the batteries removed, the time

and date settings are cleared.)

h The batteries may feel warm immediately after being

used. Before removing the batteries, switch the camera

off and wait until the batteries cool down.

When replacing the batteries, always fit 2 new batteries.

Here, “new batteries” refers to batteries that were recently

fully charged at the same time.

Battery performance deteriorates at low temperatures

(+10°C/+50°F or below) and the time for which they can be

used shortens. This is particularly true of alkaline batteries.

In cold conditions, put the batteries in your pocket or a

similar place to warm them before loading them into the

camera. If you use a body warmer to warm the batteries,

ensure that they are not in direct contact with the warmer.

Soil, such as fingerprints, on the battery terminals can

significantly reduce the number of available shots. Carefully

wipe the battery terminals clean with a soft, dry cloth before

loading the batteries.

Applicable Batteries

Incorrect use of the batteries could cause them to leak,

become hot, ignite or burst. Always observe the

precautions given below.

hDo not heat the batteries or throw them into a fire.

hDo not carry or store a battery with metal objects such as

necklaces or hairpins that could come into contact with

the metal positive

= and negative - poles of the battery.

hDo not expose the batteries to fresh or sea water, and

take particular care to keep the terminals dry.

h Do not attempt to deform, disassemble or modify the

batteries.

hDo not attempt to peel off or cut the battery casing.

hDo not drop, strike or otherwise subject the batteries to

strong impacts.

hDo not use batteries that are leaking, deformed,

discolored or exhibit any other obvious abnormality.

Notes on the Batteries

Notes on Using Your Camera Correctly

■

Places to Avoid

Do not store or use the camera in the following types of

locations :

h Very humid, dirty or dusty places.

h In direct sunlight or in places subject to extreme

temperature rises, such as in a closed car in summer.

h Extremely cold places.

h Places subject to strong vibration.

h Places affected by smoke or steam.

h Places subject to strong magnetic fields (such as

places near motors, transformers or magnets).

h In contact with chemicals such as pesticides or next

to rubber or vinyl products for long periods of time.

■

Do not expose the camera to sand

The FinePix2600 ZOOM is particularly and adversely

affected by sand. In sandy locations such as beaches

or deserts, or in locations where there is wind borne

sand, ensure that the camera is not exposed to sand.

This can cause faults that may be irreparable.

■

Notes on Condensation

If the camera is carried suddenly from a cold location

into a warm place, water droplets (condensation) may

form on the inside of the camera or on the lens. When

this occurs, switch the camera off and wait an hour

before using the camera. Condensation may also form

on the SmartMedia card. In this event, remove the

SmartMedia and wait a short time before using it again.

■

When the Camera is Unused for Long Periods

If you do not intend to use the camera for a long period

of time, remove the batteries and the SmartMedia card

before storing the camera.

■

Cleaning Your Camera

h Use a blower brush to remove dust from the lens and

LCD surface and then wipe lightly with a soft, dry

cloth. If any soil remains, apply a small amount of

lens cleaning liquid to a piece of FUJIFILM lens

cleaning paper and wipe gently.

h Do not scratch hard objects against the lens, LCD

monitor screen or viewfinder as these surfaces are

easily damaged.

h Clean the body of the camera with a soft dry cloth. Do

not use volatile substances such as thinners, benzine

or insecticide, as these may react with camera body

and cause deformation or remove the coating.

■

Using the Camera Overseas

When travelling overseas, do not place your camera in

the check-in baggage. Baggage handling at airports

may subject baggage to violent shocks, and the camera

may be damaged internally even when no external

damage is visible.

e Be sure to read this information in conjunction with “Safety Notes” (➡P.88) to ensure that you use

your camera correctly.

Fujifilm Finepix 2600 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info