Bedienungsanleitung Fujifilm Finepix 2600 (Seite 39 von 47) (Englisch)

101066

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

76 77

Always use the AC-3V AC Power Adapter (sold separately)

with the FinePix2600 ZOOM.

The use of an AC power adapter other than the AC-3V

could result in damage to your camera.

h Ensure that you do not touch the contact areas on the

AC power adapter against any other metal object as this

could cause a short circuit.

h Do not plug in the AC power adapter while you are

operating the camera using batteries. Switch the camera

off first.

h Do not load the batteries while you are operating the

camera using the AC power adapter. Switch the camera

off first.

h If you disconnect the AC power adapter when there are

no batteries in the camera, the date and time settings will

be lost and must be reset.

Notes on Using the AC Power Adapter

BC-NHS Battery Charger Specifications

Rated input

Input capacity

Rated output

Applicable

batteries

Charging

h There may be vibration noises from inside the battery

charger during use. This is normal and does not indicate

a fault.

h Do not use the battery charger to charge batteries other

than FUJIFILM HR-3UF Ni-MH batteries.

h The battery charger could cause interference if placed

close to a radio during charging. In this event, move the

radio and charger further apart.

h Do not touch the connections or contact points on

rechargeable batteries with other metal objects as this

can cause a short circuit.

Do not leave the battery charger in the following locations:

Locations subject to strong vibrations, in very dusty

locations, or in locations with very high humidity or high

temperatures, such as close to a heating appliance or in

direct sunlight.

The battery charger accepts input voltages of 100-240 V AC

at 50 or 60 Hz and can be used outside Japan. However,

because the shapes of power sockets vary by country and

by region, an appropriate plug adapter is also required for

each country. Consult your travel agent for details.

100 – 240 V AC, 50/60 Hz

100 – 240 V ~ 0.07 A

1.2 V DC, 400 mA × 2

FUJIFILM HR-3UF (Ni-MH, 1600 mAh or

1700 mAh)

HR-3UF (1600 mAh): Approx. 4.5 hours

time

Dimensions

Mass (Weight)

Operating

temperatures

HR-3UF (1700 mAh): Approx. 5 hours

90 mm × 68 mm × 26.5 mm

(3.55 in. × 2.7 in. × 1.05 in.) (L × W × D)

Approx. 85 g (3.0 oz) (excluding batteries)

0°C to + 40°C (+ 32°F to + 104°F)

If any liquid at all leaks from the batteries, wipe the battery

compartment thoroughly and then load new batteries.

f any battery fluid comes into contact with your hands or

clothing, flush the area thoroughly with water. Note that battery

fluid can cause loss of eyesight if it gets in your eyes. If this

occurs, do not rub your eyes. Flush the fluid out with clean water

and contact your physician for treatment.

■ Disposing of Batteries

When disposing of batteries, do so in accordance with your

local waste disposal regulations.

■ Notes on using compact rechargeable batteries

(Ni-MH batteries)

h To charge AA-size Ni-MH batteries, follow the correct

charging procedure using the special charger provided or

the optional fast charger.

h Do not use the battery charger to charge batteries other

than those specified for use with the charger.

h Note that the batteries may feel warm immediately after

being charged.

h Ni-MH batteries are not charged at shipment.

h The camera mechanism is such that it draws a minute

amount of current even when the camera is switched off.

Note particularly that Ni-MH batteries will become over-

discharged if left in the camera for a long period and will

no longer be usable even if recharged.

h Ni-MH batteries self-discharge even when they are not

being used. Always charge Ni-MH and Ni-Cd batteries

before using them. If the time for which a battery provides

power shortens markedly when it has been correctly

charged, this indicates that the battery has reached the

end of its effective life and should be replaced.

h Soil (fingerprints, etc) on the terminals of Ni-MH batteries

can greatly reduce the number of available shots. When

this occurs, clean the terminals carefully with a soft dry

cloth. Then use up the remaining charge in the batteries

and recharge them.

Newly purchased batteries or batteries that have been left

unused for an extended period may not be fully charged.

(This is indicated by the immediate display of the battery

low warning or a low number of available shots.) This is a

normal characteristic of the batteries and does not indicate

a fault. Repeatedly charging and using the batteries 3 or 4

times will restore them to a normal condition.

h If you repeatedly charge a Ni-MH battery before it is fully

discharged, it will suffer from the "memory effect"*,

causing the “battery low” warning to appear while there is

still ample charge remaining in the battery. To restore the

batteries to their normal condition, use up all the charge

in the batteries before recharging them.

✽ Memory effect: A phenomenon affecting the battery

characteristics such that the apparent battery capacity

decreases.

h Rechargeable batteries and the battery charger itself will

become warm due to the power stored inside the

batteries. This is normal and does not indicate a fault.

Wherever possible, use the battery charger in a well-

ventilated location.

Notes on the Power Supply

Notes on Using the Battery Charger

Fujifilm Finepix 2600 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info