101074
51
Zoom out
Zoom in
Vorherige Seite
1/58
Nächste Seite
101100
To avoid damage caused by static electricity, always
use the special static-free case provided during
transportation or storage, or keep the SmartMedia in
a storage case if available.
Do not carry SmartMedia in locations such as a
trouser pocket. This could subject the SmartMedia to
excessive force when you sit down, thereby
damaging the SmartMedia.
The SmartMedia may feel warm when it is removed
from the camera after extended periods of picture
taking or image viewing. This is normal and does not
indicate a fault.
Inserting a SmartMedia that is charged with static
electricity into your camera may result in a camera
malfunction. If this occurs, switch the camera off and
then on again.
Affix the label onto the designated area of the card.
Do not use third-party labels as this can lead to
problems when the card is inserted or removed.
When you attach the label, take care that it does not
cover any of the write-protect area.
Notes on Using SmartMedia with a PC
If you intend to take photos using a SmartMedia that
has been used on a PC, format the SmartMedia on
your camera.
When you format a SmartMedia in the camera and
then shoot and record images, a directory (folder) is
automatically created. Image data is then recorded in
SmartMedia
The SmartMedia card is a new image recording
medium developed especially for use in digital
cameras. Each SmartMedia card contains a built-in
semiconductor memory chip (NAND flash memory)
which is used for storing digital image data.
Because the data is stored electronically, the stored
image data can be erased from the card and new data
recorded.
SmartMedia with ID
The SmartMedia with ID is a SmartMedia that has an
individually assigned identification number. The
SmartMedia with ID can be used with devices that use
ID numbers for copyright protection or other purposes.
This camera accepts SmartMedia with ID in the same
way as conventional SmartMedia for image capuring.
Storing Data
In the situations listed below, recorded data may be
erased (destroyed). Please note that Fuji Photo Film
Co., Ltd. accepts no responsibility whatsoever for the
loss (destruction) of recorded data.
When the SmartMedia is used incorrectly by the
owner or a third party
When the SmartMedia is exposed to static electricity
or electrical noise
When the SmartMedia cover is opened or the
SmartMedia removed and the camera is then
Notes on the SmartMedia
TM
switched off during data recording, during data
erasing (SmartMedia formatting) or during frame
advance when images are being played back.
Back up important data onto another medium (MO
disk, floppy disk, hard disk, etc.).
Notes on Handling SmartMedia
When inserting the card into the camera, hold the
SmartMedia straight as you push it in.
Never remove the SmartMedia or switch the camera
off during data recording, during data erasing
(SmartMedia formatting) or during frame advance
when images are being played back. These actions
could result in damage to the SmartMedia.
Use only the SmartMedia specified for use with the
FinePix40i. The use of other SmartMedia could
damage the camera.
SmartMedia are precision electronic devices. Do not
bend, drop, or subject SmartMedia to excessive
shocks.
Do not use or store SmartMedia in environments
likely to be affected by strong static electricity or
electrical noise.
Do not use or store SmartMedia in very hot, humid or
corrosive environments.
Take care not to touch the SmartMedias contact area
or allow the area to become soiled. Use a dry lint-free
cloth to wipe away any soiling that does occur.
Specifications
Type
Image memory card for digital cameras
(
SmartMedia
)
Operating voltage 3.3V
Operating conditions Temperature:
0
°
C to + 40
°
C (+ 32
°
F to + 104
°
F)
Humidity:
80% or less (condensation free)
Dimensions 37 mm
×
45 mm
×
0.76 mm
(
1.45 in. × 1.77 in. × 0.03 in.
) (
W × H × D
)
this directory.
Do not change or delete the directory (folder) names
or file names on the SmartMedia from your PC as this
will make it impossible to use the SmartMedia in your
camera.
Always use the camera to erase image data on a
SmartMedia.
To edit image data, copy the image data to the
computers hard disk and then edit the copied data.
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujifilm Finepix 40I wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info