Bedienungsanleitung Fujifilm Finepix F 401 ZOOM (Seite 8 von 57) (Englisch)

101495

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

SWITCHING ON AND OFF

•

SETTING THE DATE AND TIME

CHARGING THE BATTERY

ＤＡＴＥ／ＴＩＭＥＮＯＴＳＥＴＤＡＴＥ／ＴＩＭＥＮＯＴＳＥＴ

ＳＥＴＳＥＴ ＮＯＮＯ

ＯＫＯＫ ＢＡＣＫＢＡＣＫ

DC IN 5V socket

OFFON

1 2

Check that the camera is switched off. Plug the

AC power adapter connector into the DC IN 5V

socket on the camera and then plug the adapter

itself into the main power outlet.

The self timer lamp lights (blue) and battery

charging begins. When charging is completed,

the self-timer lamp switches off.

A fully discharged battery takes roughly 3 hours

to fully recharge (at an ambient temperature of

+21°C to +25°C (+70°F to +77°F)).

Use the AC power adapter to avoid losing power

at inconvenient times, such as when you are

downloading photographed images to your

computer. Using the AC power adapter also

allows you to take pictures and play back images

without worrying about depleting the battery.

hCompatible AC power adapters

AC-5VS/AC-5VHS/AC-5VH

●

Use only the FUJIFILM products listed above.

●

See P.94 for notes on using the AC power adapter.

●

Only connect or disconnect the AC power adapter when

the camera is switched off.

Connecting or disconnecting the AC power adapter while

the camera is switched on temporarily interrupts the

power supply to the camera, so that images or movies

being shot at the time are not recorded. Failing to switch

the camera off first can also result in damage to the

SmartMedia or malfunctions during PC connection.

●

Charging times increase at low temperatures.

●

If the self-timer lamp flashes during charging, a charging

error has occurred and the battery cannot be charged. If

this occurs, see P.100.

●

Switching the camera on during charging interrupts the

charging.

●

You can charge the battery more quickly by using the

BC-60 Battery Charger (sold separately) (➡P.89).

●

The shape of the plug and socket-outlet depends on the

country of use.

Using the AC Power Adapter

When you first switch the camera on, the date is

cleared. Press the “MENU/OK” button to set the

date and time.

Slide the POWER switch to turn the camera on and

off. When you switch the camera on, the viewfinder

lamp lights (green).

●

To set the date and time later, press the

“

BACK

”

button.

●

If you do not set the date and time, this confirmation

screen will appear each time you switch the camera on.

●

When you switch the camera on, the self timer lamp

lights for about 5 seconds.

●

If you load the battery while the camera’s POWER

switch is set to ON, the viewfinder lamp/self timer lamp

lights briefly. This is normal and does not indicate a fault.

If the “

” mode is selected, the lens cover opens

and the lens slides out. Avoid pressing on the lens

so as not to damage precision components.

Obstructing the lens will cause a malfunction or fault

and the “

” or “

” message

will appear. Take care also not to get fingerprints on

the camera lens as this will result in impaired image

quality in your shots.

✽ See P.78-79 for information

on selecting the language.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix F 401 ZOOM Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info