Bedienungsanleitung Fujifilm Finepix F 401 ZOOM (Seite 9 von 57) (Englisch)

101495

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

1716

SWITCHING ON AND OFF

•

SETTING THE DATE AND TIME

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

２００２２００２ ．１．１．１．１

１２：００ＡＭ１２：００ＡＭ 

ＯＫＯＫ ＢＡＣＫＢＡＣＫ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

０４：２２０４：２２ ＡＭＡＭ

２００２２００２ ．．４．．２２２２

ＯＫＯＫ ＢＡＣＫＢＡＣＫ

3 4

01 02

Changing the date and time

To change the date and time:

1 Press the “MENU/OK” button.

2 Use “d” or “c” to select “g” OPTION and then

use “P(a)” or “{(b)” to select “SET–UP”.

3 Press the “MENU/OK” button.

4 Select “DATE/TIME” and press “c”.

See P.16 for information on setting the date and

time.

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＵＳＢＭＯＤＥＵＳＢＭＯＤＥ

ＤＳＣＤＳＣ

ＰＯＷＥＲＳＡＶＥＰＯＷＥＲＳＡＶＥ

２ＭＩＮ２ＭＩＮ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

P O S T V I E WP O S T V I E W ＯＮＯＮ

ＳＥＴＳＥＴ

ＯＫＯＫ ＢＡＣＫＢＡＣＫ

0103 0204

●

To set the time, press the “MENU/OK” button when the time

is at zero seconds.

●

If at least 2 hours have passed since the AC power

adapter was connected or the battery inserted and the

date and time set, then those settings will be maintained

for roughly 5 hours even when the camera has no power

supply (when the AC power adapter is disconnected and

the battery is removed).

1 Use “d” and “c” to select Year, Month, Day,

Hour or Minute.

2 Press “P(a)” or “{(b)” to set the number.

Once you have set the date and time, press the

“MENU/OK” button. Pressing the “MENU/OK”

button switches the camera to Photography or

Playback mode.

●

If you hold down “a(P)” or “b({)”, the numbers

change continuously.

●

When the time displayed passes “12:00”, the AM/PM

setting automatically switches.

◆

Power Save Function

◆

If the camera is not used in any way for approx. 30

seconds when the camera functions are enabled, this

function temporarily switches features such as the LCD

monitor off to reduce power consumption (➡P.80). If

the camera is then left unused for a further period (2

minutes or 5 minutes), the Power Save function

automatically switches the camera off. To switch the

camera back on, slide the Power switch to the side to

turn the camera off briefly and then turn it back on.

◆

Checking the remaining battery charge

◆

Switch the camera on and check that no battery

level warning (

Z, X or C) is displayed on

the LCD monitor. If no icon is displayed, there is

ample charge left in the battery.

Z Lit white:

The battery is approximately half charged.

X Lit red:

Battery charge low. Replace or recharge the

battery as it will run out shortly.

C Blinking red:

The battery is exhausted. The display will shortly

go blank and the camera will stop working.

Replace or recharge the battery.

●

The above estimates are for the photography modes.

In Playback mode, the transition from “

Z” to “C”

may take less time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix F 401 ZOOM Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info