Bedienungsanleitung Fujifilm Finepix F710 (Seite 61 von 65) (Englisch)

101549

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

121

There is speckling on

the image.

The camera does not

emit any sound.

Frame erase does not

erase the frame.

The ERASE ALL

function does not erase

all the frames.

Screens are not

displayed in English.

There is no image or

sound on the TV.

When the camera is

connected to a personal

computer (PC), the

photographed image or

playback image appears on

the camera’s LCD monitor.

Nothing happens when

I use the Mode dial.

The camera no longer

works correctly.

Can’t print with

PictBridge.

The camera was

connected to PC when

the USB mode was set

to “

”.

The picture was taken with a slow shutter

speed (long exposure) in a high-

temperature environment.

i The camera volume is set too low.

i The microphone was blocked during

shooting/recording.

i There is something covering the speaker

during playback.

Some frames may be protected.

i A language other than English is

selected in the “ ” setting in

SET-UP (➡P.86).

i The included A/V cable was connected

during movie playback.

The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.

i The video output setting is incorrect.

i The TV volume is turned down.

i The USB cable is not correctly

connected to the PC or camera.

i The PC is not turned on.

i Camera malfunction.

i The battery runs out.

The camera has suffered an unforeseen

problem.

“

” is not selected in USB mode in the

SET-UP menu.

This is a characteristic of CCDs and does

not indicate a camera fault.

i Adjust the volume.

i Take care not to block the microphone

during shooting/recording.

i Make sure that the speaker is uncovered.

Unprotect frames using the camera on

which the protection was first applied.

1Press the “MENU/OK” button to display

the menu.

2Press “d” or “c” to select “

F” and press

“a” or “b” to select “SET-UP”. (Press the

“MENU/OK” button to appear the SET-

UP screen on the LCD monitor.)

3Press “d” or “c” to move to option 3 and

then use “a” or “b” to select “ ”.

4Press “d” or “c” several times to select

“ENGLISH”.

5Press the “MENU/OK” button.

i After the movie playback mode is stopped,

connect the camera and TV correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.

Change the setting to “NTSC” or “PAL” (➡P.86).

i Adjust the volume.

i Set up the camera and the USB cable

(included) correctly.

i Turn the PC on.

Briefly remove the battery or disconnect the

AC power adapter. Then reload the battery or

reconnect the AC power adapter and try again.

i Load a new or fully charged battery.

Briefly remove the battery or disconnect

the AC power adapter. Then reload the

battery or reconnect the AC power adapter

and try again.

If the message still appears,

contact your FUJIFILM dealer.

Select “

” in USB mode in the SET-UP

menu.

Perform steps

to remove the

camera from PC.

h Windows

The “New Hardware Found” wizard (or

“Scanner and Camera” wizard) appears. If the

wizard does not appear, proceed to step

Click the [Cancel] button.

Disconnect the camera from the PC.

h Macintosh

The window for locating the driver

appears. If the window does not

appear, proceed to step

Click the [Cancel] button.

Disconnect the camera from the Macintosh.

Troubleshooting Possible causes Solutions

120

Troubleshooting eIf you think the camera is faulty, check the following once more.

The viewfinder lamp

does not light when

charging the battery.

The viewfinder lamp

blinks during charging

and the battery won’t

charge.

No power.

Power cuts out during

operation.

Battery runs out quickly.

No photograph is taken

when the Shutter button

is pressed.

Can’t use the flash.

The flash settings are

restricted and cannot

be selected.

Can only select

Suppressed flash

mode.

Can only select the

“

” and “

” quality

settings.

The playback image is

dark even though the

flash was used.

The image is blurred.

i There is no battery in the camera.

i The camera and AC power adapter are

not connected correctly.

i The battery terminals are dirty.

i The battery gets un-rechargeable.

i The battery has runs out.

i The AC power adapter plug has come

out of the power outlet.

i The battery is loaded backward.

i The battery cover is not closed correctly.

The battery runs out.

i Camera is being used in extremely cold

conditions.

i The terminals are soiled.

i The battery get un-rechargeable.

i No xD-Picture Card is inserted.

i The xD-Picture Card is fully recorded.

i The xD-Picture Card is not formatted.

i The xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.

i The Auto power off function has turned

the camera off.

i The battery runs out.

i The Shutter button was pressed while

the flash was charging.

i The flash is not popped up.

i The Mode dial is set to “

” Landscape.

i Continuous shooting is selected.

The Mode dial is set to “

”, “

” or

“

”.

Continuous shooting is selected.

The sensitivity is set to 1600 (high-

sensitivity photography).

i The subject is too far away.

i Your finger was covering the flash/flash

control sensor.

i The lens is dirty.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without

selecting Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

i Load the battery.

i Connect the camera and AC power

adapter correctly.

i Take the battery out briefly and then

reload it.

i Wipe the battery terminals with a clean,

dry cloth.

i Load a new battery. If the battery still

fails to charge, contact your FUJIFILM

dealer.

i Load a new or fully charged battery.

i Plug the adapter back in.

i Load the battery in the correct direction.

i Close the battery cover correctly.

Load a new or fully charged battery.

i Put the battery in your pocket or another

warm place to heat it and then load it into

the camera just before you take a picture.

i Wipe the battery terminals with a clean,

dry cloth.

i Load a new battery.

i Insert an xD-Picture Card.

i Insert a new xD-Picture Card or erase

some unwanted frames.

i Format the xD-Picture Card on the

camera.

i Wipe the xD-Picture Card contact area

with a clean dry cloth.

i Insert a new xD-Picture Card.

i Turn the camera on.

i Load a new or fully charged battery.

i Wait until the flash has finished charging

before pressing the Shutter button.

i Pop up the flash.

i Change the Photography mode.

i Set continuous shooting to “OFF”.

The flash settings are restricted because

the camera settings are tailored to the

scene being shot. Change the Photography

mode for a wider range of flash settings.

Set continuous shooting to “OFF”.

Set the sensitivity to 800 or less.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

i Clean the lens.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the picture.

Troubleshooting Possible causes Solutions

Fujifilm Finepix F710 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info