Bedienungsanleitung Fujifilm finepix s 2 pro (Seite 51 von 65) (Englisch)

288584

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

101

Connection

100

CONNECTING TO A COMPUTER VIA IEEE 1394

IEEE

1394 socket

Camera

1Load the media containing your shots into the

camera.

2Switch the camera on.

3Select “1394 DOWNLOADING” as the “PC

MODE” setting in SET–UP (➡P.89).

4Set the power switch to “OFF” to switch the

camera off.

●

Refer to the operating system compatibility charts on

P.100 and check that your operating system supports the

IEEE1394 interface.

●

Use of the AC power adapter (sold separately) is

recommended when connecting the camera to a

computer.

●

If a SmartMedia and Microdrive are both loaded into the

camera at the same time, the media selected in the

“MEDIA” setting in SET–UP is used (➡“Setup”, P.89).

1Switch your PC on.

2Connect the camera to the computer using

the bundled IEEE1394 cable.

3Switch the camera on.

IEEE

1394 socket

IEEE

1394 socket

Always use the prescribed procedure when

disconnecting or switching off the camera

(➡P.103).

●

In Windows XP and Mac OS X, automatic startup must be set up the first time you connect.

●

The first time you connect, the media may take a few moments to mount.

●

Take care to ensure that the cable is connected the right way round and that the plugs are firmly inserted all

the way into the sockets.

Camera Operations

PC Operations

h The Access lamp blinks when the camera

and computer are exchanging data.

h “1394 DOWNLOADING” is displayed on

rear display panel.

h The Auto Power Off function is disabled

while the camera is connected to a

computer.

●

When replacing the media, always switch the camera

and computer off first using the procedure described

on P.103.

●

Do not disconnect the USB cable when the camera is

communicating with the PC. See P.103 for information

on the disconnection procedure.

h If FinePixViewer is installed, it starts up

automatically.

h A removable disk icon appears and you

can use your PC to transfer files to and

from the camera.

✽ Screen for

Windows 98 SE

If the above operations do not occur, you do

not have the required software programs or

drivers installed on your PC. Refer to the

Software Quick Start Guide booklet and

complete the required PC setup procedures.

Then reconnect the camera to your PC.

Windows Macintosh

CONNECTING TO A COMPUTER

Install the software before connecting the camera to a computer.

The available functions differ depending on the camera’s PC mode settings, as shown below.

Bundled “software for FinePix”

CD-ROM

Optional “hyper-Utility

software”

FinePix S2 Pro

Computer

ＰＣＰＣ

ＭＯＤＥＭＯＤＥ ＵＳＢＵＳＢＤＯＷＮＬＯＡＤＩＮＧＤＯＷＮＬＯＡＤＩＮＧ

ＰＣＰＣ

ＭＯＤＥＭＯＤＥ １３９４１３９４ＤＯＷＮＬＯＡＤＩＮＧＤＯＷＮＬＯＡＤＩＮＧ

ＰＣＰＣ

ＭＯＤＥＭＯＤＥ １３９４ＳＨＯＯＴＩＮＧ１３９４ＳＨＯＯＴＩＮＧ

xAllows the camera to be

controlled and shots to be

taken from a computer.

xImages photographed with

the camera can be

automatically saved on the

computer.

Special USB cable

USB driver Shooting driver

IEEE 1394 cable

FinePixViewer

Shooting Software

xAllows photographed images to be saved on a computer

xCCD-RAW files can be played back and converted to other

formats.

xVoice memos can be played back.

h Refer to the User’s Guide for the optional Hyper-Utility Software HS-S2 for more information

on the photography modes.

h This description covers the downloading modes.

Connecting to a Computer

To connect the camera to a computer via a USB port, the computer must be equipped with a

USB port as a standard feature. (Operation is not guaranteed for USB ports added later.) To

connect via an IEEE1394 port, check that the interface is OHCI compliant and then refer to the

table below to check whether it is supported by your operating system.

■

Operating System Compatibility Chart (Windows) u: Can be connected ✕: Cannot be connected

Connection type

Windows 98

Windows 98 SE

(Second Edition)

✽2

Windows Me

(Millennium Edition)

Windows 2000

Windows XP

IEEE1394

uuuuu

USB

✽1

✽1 Can be used by installing the driver from the bundled CD-ROM.

✽2 Select Windows Update from the Start button menu and update the 1394 device driver (Your system must be

capable of connecting to the Internet).

■

Operating System Compatibility Chart (Macintosh) u: Can be connected ✕: Cannot be connected

✽1 Can be used by installing the driver from the bundled CD-ROM.

✽2 Cannot be used even when installed as a standard feature, but can be used by downloading and installing the free

update to Mac OS 9.1. Contact Apple Computers (http://www.apple.com) for information on software updates.

Connection type

Mac OS 8.6

Mac OS 9.0.4

✽2

Mac OS 9.1

Mac OS 9.2.1

Mac OS X

IEEE1394

uuuuu

USB

✽1

ＦＲＡＭＥＮＯ．ＦＲＡＭＥＮＯ．

ＯＦＦＯＦＦ

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＲＥＳＥＴＡＬＬＲＥＳＥＴＡＬＬ

ＢＥＥＰ♪ＢＥＥＰ♪

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＯＫＯＫ

ＳＥＴＳＥＴ

ＬＯＷＬＯＷ

ＰＣＭＯＤＥＰＣＭＯＤＥ

１３９４１３９４ＤＯＷＮＬＯＡＤＩＮＧＤＯＷＮＬＯＡＤＩＮＧ



ＬＡＮＧＵＡＧＥＬＡＮＧＵＡＧＥ

ＥＮＧＬＩＳＨＥＮＧＬＩＳＨ



ＯＫＯＫ

ＢＡＣＫＢＡＣＫ

0201

Fujifilm finepix s 2 pro Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info