Bedienungsanleitung Fujifilm Finepix S 7000 (Seite 14 von 61) (Englisch)

101579

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

26 27

Using

the Camera

Click

In a shot with this type of composition, the subjects

(two people in this case) are not in the AF frame. If

the picture is taken at this point, the subjects will

not be in focus.

USING AF/AE LOCKINDICATOR LAMP DISPLAY

３３３３

ＡＵＴＯＡＵＴＯ

Move the camera slightly so that one of the

subjects is in the AF frame.

Pressing the Shutter button down halfway, the

camera emits a short double-beep and focuses on

the subject. At that point, the AF frame on the

screen becomes smaller and the camera sets the

shutter speed and aperture (the indicator lamp

(green) changes from blinking to lit).

３３３３

ＡＵＴＯＡＵＴＯ

Bebeep

２５０２５０Ｆ５．６

Continue to hold the Shutter button down halfway

(AF/AE lock). Move the camera back to the original

image and then fully press down on the Shutter

button.

●

You can reapply the AF/AE lock as many times as you like

before releasing the shutter.

●

The AF/AE lock operates in all Photography modes and can

be used to ensure excellent results.

２５０２５０Ｆ５．６

◆

AF/AE lock

◆

On the FinePix S7000, when you press the Shutter button down half way, the focus and exposure

settings are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image or if

you want to set the exposure before you compose the final shot, lock the AF and AE settings and then

compose and shoot your picture to get the best results.

h When you cannot focus and AF/AE lock does not give the correct exposure

Position the AF frame over the main subject and apply the AE lock (➡P.55). Then position the AF

frame over another subject at roughly the same distance, press the Shutter button down halfway,

recompose the shot and then take the picture.

TAKING PICTURES

(

AUTO MODE

)

STILL PHOTOGRAPHY MODE

NUMBER OF AVAILABLE FRAMES

ＡＵＴＯＡＵＴＯ

２５０２５０Ｆ５．６

３３３３

The number of available frames appears on the

screen.

●

See P.32 for information on changing the quality setting.

●

The default quality “y” set at shipment is 1.

■ Standard number of frames per media

This is the standard number shown for a new media formatted on the camera. The larger the capacity of the media, the

greater the difference between the standard number and the actual number of frames displayed.

Also, because the amount of data recorded varies depending on the subject, the number of frames may not decrease or may

decrease by 2 when a frame is taken. Consequently, the actual number of frames may be more or less than what is

displayed.

Quality mode

Q F Q N

Number of recorded pixels

4048 × 3040

DPC-16 (16 MB) 3

105

2848 × 2136

169

2016 × 1512

166

332

1600 × 1200

101

204

409

1280 × 960

137

275

550

4048 × 3040

DPC-32 (32 MB)

DPC-64 (64 MB)

DPC-128 (128 MB)

DPC-256 (256 MB)

105 211 339 665 818 1101 39DPC-512 (512 MB)

72 144 232 459 559 752 27Microdrive 340 MB

217 432 698 1368 1642 2190 81Microdrive 1 GB

◆

Subjects not suitable for autofocus

◆

Though the FinePix S7000 uses an accurate autofocus mechanism, it may have difficulty focusing at all

on the types of subjects and situations listed below. In such cases, the image may be out of focus.

h Very shiny subjects such as a mirror or car

body.

h Subjects photographed through glass.

h Subjects that do not reflect well, such as hair

or fur.

h Subjects with no substance, such as smoke or

flames.

h When the subject is dark.

h Subjects moving at high speed.

h When there is very little contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as

the background).

h When there is a high-contrast subject other

than the main subject at or near the center of

the image and that subject is closer to or

further from the camera than the main subject

(as when photographing someone against a

background with strongly contrasting

elements).

For subjects of this type, use AF/AE lock

(➡P.27).

Display Status

Lit green Ready to shoot.

Blinking green AF/AE in progress, camera shake warning or AF warning (Ready to shoot).

Blinking green and

orange alternately

Recording to media (Ready to shoot).

Lit orange Recording to media (Not ready).

Blinking orange Charging the flash (flash will not fire).

Flashing green

(1-second intervals)

Camera in Power save mode (➡P.86).

Blinking red

Media

Warnings

No card inserted, card not formatted, incorrect format, card full,

media

error.

i Lens operation error.

✽ Detailed warning messages appear on the screen (➡P.111, 112).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm Finepix S 7000 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info