Bedienungsanleitung Fujifilm INSTAX MINI LIPLAY (Seite 8 von 36) (Englisch, Französisch, Spanisch)

693414

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Common Sense Camera Care

■ Camera Care

1. Do not open the film door until you have used up the

film; otherwise, the rest of the film is exposed and

turns white. The film can no longer be used.

2. Your camera is a precision instrument. Do not get it wet

or drop it. Also, do not expose it to sand, dust or dirt.

3. Do not use a strap made for cellular phones or other

similar electronic products. These straps are usually

too weak to hold your camera securely. For safety, use

only straps designed for your camera, and use only as

specifically intended and instructed.

4. Do not use cleaning products or solvents such as those

with bleach or alcohol to remove dirt.

5. In hot weather, do not leave your camera in hot places

such as in a car or on the beach. Do not leave it in damp

places or places where weather exposure could result.

6. Moth repellent gas such as naphthalene may affect your

camera and prints. Store your camera and photo prints

in a place where exposure to harmful cleaning or other

household elements will be avoided.

7. Note that the temperature range within which your

camera can be used is +5°C to +40°C (+41°F to +104°F).

8. Take great care to ensure that printed materials do not

violate copyright, image rights, privacy or other personal

rights and do not offend public decency. Actions that

violate the rights of others, are contrary to public

decency or constitute a nuisance may be punishable by

law or otherwise legally actionable.

■ Handling the LCD Monitor

As the LCD monitor can be easily damaged, do not scratch

the surface with a solid material. To avoid the LCD monitor

getting damaged, we recommend you attach a protective,

clear plastic sheet (commercially available) on the monitor.

■ Charging the Battery

The battery is not charged at shipment. Charge the

battery completely before use.

Charge the battery using the supplied USB cable. Charging

times will increase at ambient temperatures below +10 °C

(+50 °F) or above +35 °C (+95 °F). Do not attempt to charge

the battery in environments with temperatures above +40

°C

(+104 °F); at temperatures below +5 °C (+41 °F), the battery

will not charge.

■ Battery Life

At normal temperatures, the battery can be recharged

about 300 times. A noticeable decrease in the length of time

the battery will hold a charge indicates that it has reached

the end of its service life.

■ Cautions: Handling the Battery

The battery and camera body may become warm to the

touch after extended use. This is normal.

■ Certification marks acquired by the camera are located

inside the film chamber.

■ Cautions During Printing

Do not shake the

camera while

printing.

Do not drop the

camera while

printing.

Do not cover the

film ejection slot

while printing.

BO-DM1_US.indb 8 2019/4/10 15:10:13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm INSTAX MINI LIPLAY Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm INSTAX MINI LIPLAY

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info