Bedienungsanleitung Fujifilm INSTAX MINI LIPLAY (Seite 10 von 36) (Englisch, Französisch, Spanisch)

693414

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Bluetooth® Devices: Cautions

IMPORTANT: Read the following notices before using the

product’s built-in Bluetooth transmitter.

■ Use only as part of a Bluetooth network.

FUJIFILM Corporation and its affiliates do not accept liability

for damages resulting from unauthorized use. Do not use

in applications requiring a high degree of reliability, for

example in medical devices or other systems that may

directly or indirectly impact human life. When using the

device in computer and other systems that demand a

greater degree of reliability than Bluetooth networks, be

sure to take all necessary precautions to ensure safety and

prevent malfunction.

■ Use only in the country in which the device was

purchased.

This device conforms to regulations governing Bluetooth

devices in the country in which it was purchased. Observe

all location regulations when using the device. FUJIFILM

Corporation and its affiliates do not accept liability for

problems arising from use in other jurisdictions.

■ Wireless data (images) may be intercepted by third

parties.

The security of data transmitted over wireless networks is

not guaranteed.

■ Do not use the device in locations subject to magnetic

fields, static electricity, or radio interference.

Do not use the transmitter in the vicinity of microwave

ovens or in other locations subject to magnetic fields, static

electricity, or radio interference that may prevent reception

of wireless signals. Mutual interference may occur when the

transmitter is used in the vicinity of other wireless devices

operating in the 2.4 GHz band.

■ The Bluetooth transmitter operates in the 2.4 GHz band.

The standard output is 3.16 mW.

■ This device operates on the same frequency as

commercial, educational, and medical devices and

wireless transmitters.

It also operates on the same frequency as licensed

transmitters and special unlicensed low-voltage transmitters

used in radio-frequency identification tracking systems for

assembly lines and in other similar applications.

■ To prevent interference with the above devices, observe

the following precautions.

Confirm that the radio-frequency identification transmitter

is not in operation before using this device. If you notice

that this device causes interference in low-voltage radio-

frequency identification tracing systems, contact a FUJIFILM

representative.

■ The following may be punishable by law:

– Disassembly or modification of this device.

– Removal of device certification labels.

■ Trademark Information

The Bluetooth® word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc., and any use of

such marks by FUJIFILM is under license.

BO-DM1_US.indb 10 2019/4/10 15:10:14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujifilm INSTAX MINI LIPLAY Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fujifilm INSTAX MINI LIPLAY

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info