Bedienungsanleitung Fujitsu LifeBook S7010 (Seite 111 von 128) (Englisch)

574838

111

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

101

WIreless LAN User’s Guide

4. Click [Share this printer].

5. Enter the sharing printer name in [Share name].

6. Click the [OK] button.

Confirming connection

After you have finished the network setup operations,

access the folder whose sharing has been set for other

personal computers. Also, confirm the status of the radio

waves in case of trouble such as a network connection

failure.

Connecting your personal computer to another

personal computer

1. Click [Start] first and then [My Computer]. The

[My Computer] window will be displayed in the left

frame.

2. Click [My Network Places] in the “Other Places”

list. The window [My Network Places] will be dis-

played.

3. Click [View workgroup computers] under Network

Tasks in the left frame.

4. Double-click the personal computer to which your

personal computer is to be connected. The folder

that was specified in “Setting the file-sharing func-

tion” on page 100 will be displayed.

5. Double-click the folder to be accessed.

Confirming the status of the radio

1. Right-click the Atheros icon in the lower right cor-

ner of the screen.

2. Click [Open Client Utility]. The Atheros Client

Utility window opens.

3. On the Current Status tab, you will find the current

operating status of the radio. (When the radio is

turned off or the computer is not yet connected,

some of the conditions will not be displayed.)

■

Profile Name

The current configuration profile is displayed.

■

Network Type - Configured Network Type

[Access Point] or [AdHoc] will be displayed.

■

Current Mode

Indicates the frequency and data rate currently

used by the radio.

■

Current Channel

The channel number currently used by the radio.

■

Link Status

Displays the current connected state of the

WLAN module.

■

Encryption Type

Displays the encryption type currently used by

the radio.

■

IP Address

Displays the current TCP/IP address assigned to

the WLAN adapter.

On the Current Status tab, click the [Advanced] button.

The following information will be displayed.

■

Country

The country with the country code for which the

radio is configured.

■

Transmit Power Level

Displays the current transmit power level of the

radio.

■

Network Name (SSID)

Displays the Network Name (SSID) currently

used by the radio.

■

Power Save Mode

Displays the configured Power Save Mode

currently used by the radio. [Off], [Normal], or

[Maximum] will be displayed.

■

BSSID

Displays the Basic Service Set Identifier. This is

typically the MAC address of the Access Point or

in the case of AdHoc networks, is a randomly

generated MAC address.

■

Frequency

Displays the center frequency currently being

used by the radio.

■

Transmit Rate

Displays the current data rate used by the radio

to transmit data.

■

Receive Rate

Displays the current data rate used by the radio

to receive data.

In the case of access point (infrastructure)

connection, enter the necessary data for

the access point before confirming

connection. Refer to the manual of the

access point for the access point setup

procedure.

S Series.book Page 101 Thursday, February 19, 2004 4:52 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fujitsu LifeBook S7010 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info